Year1
- 产地：
- 台湾
- 型号：
- MFL60L2-50-M-K-14-50
- 平均使用寿命：
- 20000小时
Angle reducer series:
Small and lightweight
Positive integer ratio of the whole number ratio from ~
Ultra-low backlash full series ~ arc minutes
Taiwan The bevel gear structure of the angle reducer is suitable for occasions with limited installation space or steering output
The angle reducer is suitable for servo motors and stepper motors of various brands
The sealed design of the precision bevel gear reducer does not require oil changes. Ease of installation
The internal components of the angle reducer are made of heat-treated high-strength alloy steel, which is enough to cope with severe and harsh working environments
-ddd
Taiwan Jusheng precision angle reducer is among the best in the reducer family. Angle reducers are widely used in servo, stepper, DC and other transmission systems due to their small size, high transmission efficiency, wide deceleration range, and high precision. Its function is to ensure precision transmission. Taiwan's bevel gear reducer is mainly used to reduce the speed, increase the torque and reduce the load/motor inertia ratio. In the past few years, some users have broken the output shaft of the precision angle reducer due to illegal installation and other human factors when using the angle reducer, causing the company to suffer unnecessary losses. Therefore, in order to better help users make good use of precision reducers, we will introduce to you in detail how to correctly install angle bevel gear reducers.
The correct installation, use and maintenance of the angle reducer is an important part of ensuring the normal operation of mechanical equipment. Therefore, when installing the bevel gear reducer, be sure to assemble and use it in strict accordance with the following installation and use related matters.
Before the first step of installation, confirm whether the motor and the angle reducer are intact, and strictly check whether the dimensions of the parts connecting the motor and the Taiwan precision bevel gear reducer match. Here are the positioning bosses of the motor, Dimensions and fitting tolerances of input shaft and bevel gear reducer groove.
The second step is to unscrew the screw on the dust hole on the outside of the Taiwan angle reducer flange and adjust the system clamping ring so that the side hole is aligned with the dust hole, insert the inner hexagon and tighten. Then remove the motor shaft key.
The third step is to naturally connect the motor to the precision angle reducer. When connecting, it must be ensured that the concentricity of the output shaft of the Taiwan precision angle reducer and the input shaft of the motor is consistent and that the outer flanges of the two are parallel. Inconsistent concentricity may cause the motor shaft to break or the bevel gear reducer gear to wear.
In addition, it is strictly forbidden to hit with a hammer during installation to prevent excessive axial or radial force from damaging the bearing or gear. Be sure to tighten the mounting bolts before tightening the force bolts. Before installation, wipe the anti-rust oil on the motor input shaft, positioning boss and angle reducer connection parts with gasoline or zinc-sodium water. Its purpose is to ensure the tightness of the connection and the flexibility of operation and to prevent unnecessary wear.
Before connecting the motor to the Jusheng angle reducer, the motor shaft keyway should be vertical to the tightening bolt. In order to ensure uniform force, first screw on the mounting bolts at any diagonal position of the Taiwan angle reducer but do not tighten them, then screw on the other two diagonally positioned mounting bolts, and finally tighten the four mounting bolts one by one. Finally tighten the force bolt. All tightening bolts of the angle bevel gear reducer must be fixed and inspected with a torque wrench according to the indicated fixed torque data.
Jusheng bevel gear reducer selection considerations:
The selection of Taiwan Jusheng angle reducer should follow the principle of combining applicability and economy. That is to say, the technical indicators of Taiwan's angle reducer reducer can not only meet the requirements of the equipment but also save costs. Excess or failure will result in cost waste, so the correct selection of the angle bevel gear reducer is very important.
When selecting a corner reducer, its structural type, load-bearing capacity, reduction ratio, output speed, axial force, radial force, torsional rigidity, backlash and other internal indicators should also be fully considered. The installation form, Working conditions, working environment and other external structures. The following are the most basic requirements for selecting a precision angle reducer:
Installation dimensions: that is, the size of the front end of the servo motor. When selecting Taiwan angle reducer, the input end of the bevel gear reducer must exactly match the size of the output end of the servo motor.
Reduction ratio: motor rated output revolutions per minute/reduction ratio = how many revolutions the reducer outputs per minute. The angle reducer should try to use a reduction ratio as close to the ideal as possible to ensure the ideal speed.
Torque: The rated output torque of the servo motor (the stepper motor is the holding torque) * reduction ratio. The rated output revolutions of the bevel gear angle reducer must be greater than this value. If it is less than the angle reducer, the use will be shortened. In severe cases, the shaft may break or the teeth may collapse.
Return backlash: Return backlash (accuracy) r (one circle of the output shaft of the angle reducer is divided into one degree, one degree = arc minute), which is what we often call the arc minute unit:. The smaller the return clearance, the higher the accuracy and the higher the cost. Users can just choose a precision angle reducer that meets their accuracy requirements. Also consider lateral/radial forces and average life. Reducers with large lateral/radial forces are relatively reliable and less prone to problems during installation and use. Usually its average life span far exceeds the life span of the servo motor it is equipped with.
Taiwan Jusheng Industrial Co., Ltd. (China's first-level agent-Shenzhen Zhongzheng Precision Electromechanical), founded in 2000, is one of the world's advanced professional manufacturers of precision angle reducers. The company's strong technical force, advanced process equipment, first-class product quality and management level are amazing to the world. The company's products have officially passed standardized quality system certification. The precision angle reducer series produced by Jusheng Industrial Co., Ltd. is deeply trusted and praised by users for its high quality, high efficiency, low noise, superior performance-price ratio, quick and easy installation, etc.
WhatsApp
