Bevel gear reducer

产地：

台湾

型号：

WTS090L1-5-19-70

平均使用寿命：

20000小时

Bevel gear reducer, bevel gear planetary reducer, Taiwan right angle reducer, degree reducer, bevel gear reducer, right angle planetary reducer, angle reducer, Taiwan servo reducer, stepper motor reducer, bevel gear planetary reducer. Taiwan's D bevel gear reducer is suitable for occasions with limited installation space and can be used with servo motors and stepper motors from various brands around the world. It is widely used in automated machinery and equipment such as feeders, punch peripherals, machining centers, and mobile phone parts production lines.
---. - ---. - ---. - ---. -
.
Precautions for selecting bevel gear reducer:

The selection of bevel gear reducer should follow the principle of combining applicability and economy, which means that the various technical indicators of the bevel gear planetary reducer can not only meet the requirements of the equipment but also save costs. Excess or failure will result in cost waste, so the correct selection of bevel gear reducer is very important.

When selecting a bevel gear planetary reducer, its structural type, load-bearing capacity, reduction ratio, output speed, axial force, radial force, torsional rigidity, backlash and other internal indicators should also be fully considered. Installation form, working conditions, working environment and other external structures. The following are the most basic requirements for selecting a bevel gear reducer:

Installation dimensions: that is, the size of the front end of the servo motor. When selecting a bevel gear reducer, the input end of the bevel gear planetary reducer must exactly match the size of the output end of the servo motor.

Reduction ratio: motor rated output revolutions per minute/reduction ratio = how many revolutions the reducer outputs per minute. The bevel gear planetary reducer should try to use a reduction ratio as close to the ideal as possible to ensure the ideal speed.

Torque: Servo motor rated output torque (stepper motor is holding torque) * reduction ratio bevel gear reducer rated output revolutions must be greater than this value. If it is less than the bevel gear reducer, the use will be shortened. In severe cases, the shaft may break or the teeth may collapse.

Return backlash: Return backlash (accuracy) r (one circle of the output shaft of the bevel gear planetary reducer is divided into one degree and one degree = arc minute), which is what we often call the arc minute unit:. The smaller the return clearance, the higher the accuracy and the higher the cost. Users can just choose a bevel gear reducer that meets their accuracy requirements. Also consider lateral/radial forces and average life. Reducers with large lateral/radial forces are relatively reliable and less prone to problems during installation and use. Usually its average life span far exceeds the life span of the servo motor it is equipped with.

Notes on Taiwan right angle reducer:
Installation site: Confirmation of oil: When ordering, the softened oil of this type of product is semi-solid and does not require oil change, but it must be noted that it is used below ℃ We should be informed in advance so that antifreeze can be added. We must also be informed to install additional protective measures in acid and alkali places.
Servo motor: When ordering, the factory should be informed of the required connecting flange and shaft dimensions of the servo motor.
Installation of Taiwan right-angle reducer: The right-angle reducer body is a very precise product, so care must be taken during installation to strictly prohibit impacting or hitting the axis or any part with a hammer.

Right-angle reducer lubrication:
The right-angle reducer is a sealed design and does not require oil change.
The oil is a semi-solid high-grade synthetic oil
Ambient operating temperature: ~+℃
The maximum allowable temperature of the Taiwan right-angle reducer body is below ℃
Note: The workplace temperature is below ℃ before ordering Must be clearly stated

Quality guarantee for purchasing bevel gear reducer:
Under normal use, the bevel gear reducer is guaranteed for one year from the date of delivery.
It has a two-year oil leakage warranty under normal use.
Note: Man-made or natural disasters are not covered by the warranty.
Installation method of bevel gear planetary reducer:

Apply a little anti-rust oil to the motor output shaft and flange.
If there is a bushing, when placing it into the input shaft of the bevel gear planetary reducer, pay attention that the groove on the bushing must be aligned with the groove on the input shaft of the bevel gear reducer.
Place the motor to be installed on the platform with the motor output axis upward, then secure the motor and remove the key.
Carefully align the groove on the input shaft of the servo right-angle reducer with the key groove on the motor and slowly slide it in.
Lock the fixing screw on the input shaft of the bevel gear planetary reducer with the first torque.
Tighten the fixing screws of the motor and bevel gear reducer.
Increase the torque evenly and gradually (three times) to tighten the fixing screws on both sides of the input shaft of the bevel gear reducer.
Please do not hit the output shaft of the reducer with gravity to avoid damaging the internal mechanism of the bevel gear reducer.