Year1
- 齿数：
- 11-44
- 功 率：
- 0.18KW～15KW
- 转 矩：
- 1.5N·m～2062N·m
Circulating water cooling tower reducer
The special low-noise reducer for circulating water cooling tower fans is another cooling tower supporting product, suitable for occasions with strict noise requirements and high cooling tower tonnage. Due to the planetary gear transmission, it can withstand high speeds and heavy loads, and has the advantages of impact resistance, corrosion resistance, smooth operation, and low noise. Its supporting motor is a series of three-phase asynchronous motors dedicated to cooling towers.
The cooling tower reducer is a type of single-stage hypoid bevel gear reducer carefully designed according to environmental protection requirements and environmental noise. The machine and motor use positioning joints to transmit power directly, eliminating the transmission shaft. The waterproof motor and reducer are directly connected to a special frame and integrated into the air duct. Therefore, it runs smoothly, has low noise, and is easy to install and maintain. . The cooling tower reducer uses lithium-based grease-(-) to lubricate the upper bearing, and the remaining bearings and gears are lubricated with oil, ensuring that the machine has high efficiency, strong load-bearing capacity, safety and reliability.
Cooling tower reducer, cooling tower fan special reducer, circulating water cooling tower fan special low noise reducer
r
rSpeed r/
r
r
r
r
rMotor power
r～
r.～
r
rspeed r/
r
r
r
rMotor power
r.～
r.～
r
rspeedr/
r
r
r
rMotor power
r.～
r～
Reducer installation requirements: () Check whether the matching with the cooling tower and fan complies with the design. Requirements;
<>()
The reducer should generally be hoisted as a whole. If it is lifted separately, attention should be paid to the fact that the steel ball in the spindle taper hole cannot be missed or displaced;
Reducer, Mainly used for mechanical transmission in metallurgy, mining, lifting, transportation, cement, textile, printing and dyeing, pharmaceutical and other industries. Main working features:
() Light weight and small size. Compared with commonly used cylindrical gear reducers, cooling tower reducers are lighter/more in weight and can be reduced in size/~/.
() High transmission efficiency, special reducer for cooling tower, single-stage can reach %, two-stage can reach %, three-stage can reach %, the transmission power range is large, from kilowatt to kilowatt.
() Using hard tooth surface, long service life and wide applicability.
The gear material of this reducer is carefully selected and the manufacturing process is strict. After mechanical processing, it undergoes heat treatment such as tempering, carburizing, and quenching. All gears are finally ground (external teeth) to improve the overall quality of the reducer. Guaranteed.
This product adopts a special cooling tower motor that is waterproof, moisture-proof and corrosion-resistant. It has good sealing performance and up to 100% protection level. It is widely suitable for cooling tower environments under various conditions.
Factory address: Liying Industrial Park, Rencheng District, Jining City, Shandong Province
Consultation phone number
:
Online:
WhatsApp
