Year1
- 产地：
- 深圳
- 型号：
- PM110L1-2-22-110
- 平均使用寿命：
- 20000小时
Installation instructions for three-axis planetary reducer:
Installation sequence of three-axis reducer and servo motor:
Install the servo motor Install the output shaft into the input shaft of the three-axis planetary reducer
Tighten the screws (the connection between the servo and the reducer)
Tighten the screwdrivers on the left and right sides evenly
Tighten the screws on both sides Tighten with a torque wrench
Insert the protective cover into the screw hole of the reducer
Installation method of three-axis planetary reducer:
Apply a little anti-rust oil to the motor Output shaft, flange.
If there is a bushing, when placing it into the input shaft of the three-axis reducer, pay attention that the groove on the bushing must be aligned with the groove on the input shaft of the reducer.
Place the motor to be installed on the platform with the motor output axis upward, then secure the motor and remove the key.
Carefully align the groove on the input shaft of the servo three-axis reducer with the key groove on the motor and slowly slide it in.
Lock the fixing screw on the input shaft of the three-axis planetary reducer with the first torque.
Tighten the fixing screws of the motor and reducer.
Increase the torque evenly and gradually (three times) to tighten the fixing screws on both sides of the input shaft of the planetary gear reducer.
Please do not hit the output shaft of the reducer with gravity to avoid damaging the internal mechanism of the reducer.
Product features of three-axis planetary reducer:
High positioning accuracy: The three-axis planetary reducer adopts precision grinding gear tooth surface to smooth and precise tooth shape. The gear box, bracket and overall structural design are made of strong materials to ensure high stability and strict quality control.
2. High torque: The angle double-sided shaft reducer uses high-quality tapered bearings to enable the output shaft to withstand greater axial and radial loads. In addition, the gear box and bracket are made of strong materials and have an overall structural design.
Three high starting properties: Due to the balanced structural characteristics of the planetary reducer and its high precision and low inertia moment, it can have high starting properties.
4. Low noise: The precision ground gear tooth surface is highly precise and smooth, making the gear run smoothly and with low noise. Use selected lubricating oil: German-made selected synthetic lubricating oil is used instead of the grease lubrication used in general reducers. Due to its good fluidity, the gears can operate under sufficient oil film protection to reduce noise.
Five low tooth backlash: Under precise processing and strict quality control, the standard tooth backlash is ~ arc minutes in one section and ~ arc minutes in two sections. The precision tooth backlash is ~ arc minutes in one section and ~ arc minutes in two sections. Lower backlash can be customized if necessary.
Six easy installation: The connecting plate and input shaft hole size of the servo three-axis planetary reducer are designed to be flexible so that the three-axis reducer can be combined with the servo motors of various brands.
Seven long lifespan: Maintenance-free: Precision ground gears are made of high-grade nickel-chromium-molybdenum alloy steel, hobbing and deep carburizing hardening, and then grinding the tooth surface to make the gears highly rigid and durable. The tooth surface is smooth and has good wear resistance. The three-axis planetary reducer uses high-quality German-made synthetic lubricating oil, which has good fluidity and is rich in extreme pressure anti-pressure agents, so that the various parts in the gear box are fully lubricated and protected. The use of Japanese high-quality non-perishable oil seals ensures good sealing performance. Western European famous brand tapered bearings are used to bear the maximum axial and radial load. The synergy of the above excellent quality makes the reducer long-lasting and maintenance-free.
WhatsApp
