Taiwan corner hollow shaft reducer

产地：

台湾

型号：

MFT90-S0-L1-5-19-70

平均使用寿命：

20000小时

Taiwan corner reducer, corner hollow shaft reducer, hollow shaft output reducer, corner through-hole reducer, angle reducer, hollow shaft reducer, corner reducer, Taiwan hollow shaft reducer, corner output reducer, Taiwan corner hollow shaft reducer- ----Bevel gear structure bilateral hollow shaft output is suitable for occasions with limited installation space, steering output, and simultaneous operation of both ends.
-
.
Installation method of Taiwan Jusheng corner hollow shaft reducer:
Apply a little anti-rust oil to the motor output shaft and flange
If there is a sleeve When placing it into the input shaft of the Jusheng angle reducer, note that the grooves on the sleeve must be aligned with the grooves on the input shaft of the reducer.
Place the motor to be installed on the platform with the motor output axis upward, then secure the motor and remove the key.
Align the groove on the input shaft of the angular hollow shaft output reducer with the key groove on the motor and slowly slide it in.
Lock the fixing screw on the input shaft of the Jusheng hollow shaft reducer with the first torque.
Tighten the fixing screws of the motor and the angle output reducer.
Increase the torque evenly and gradually (three times) to tighten the fixing screws on both sides of the input shaft of the angular hollow shaft output reducer.
Please do not hit the output shaft of the angle reducer with gravity to avoid damaging the internal mechanism of the hollow shaft reducer.

At present, corner hollow shaft reducer products have occupied most of the market share in Taiwan, Europe and the United States, and have gradually entered various countries and regions in Asia. Jusheng Industrial Co., Ltd. began to produce Taiwan angle reducers for high-precision servo motors in 2017. Years of experience accumulation, innovation and improvement have made the reducers produced by Jusheng Industrial Co., Ltd. in the leading position in the industry in many aspects. It has become one of the most famous angle output reducer manufacturers in the world in terms of technology and market occupancy. one. Today, in every part of the world, cost-effective corner hollow shaft reducers are the first choice for users when choosing hollow shaft reducers.
Analysis of the structural components of the corner hollow shaft reducer:

Gearbox: The corner hollow shaft reducer is made of chromium-molybdenum alloy steel and one-piece molding design with high precision, large output torque and high corrosion resistance Effect.
Output shaft: The angle reducer adopts a one-piece molding design to ensure large torque output. The structure is rigid and the surface is treated with electroless nickel to provide high anti-rust function.
Input shaft: Modular design can be matched with servo motors of various brands. The surface of the output shaft is dyed black.
Sun gear: The hollow shaft reducer is made of nickel-chromium-molybdenum alloy steel tooth surface that has been carburized to provide high wear resistance and high impact resistance. The tooth profile finishing treatment can improve gear accuracy and reduce noise.
Planetary gear: The angle output reducer is made of nickel-chromium-molybdenum alloy steel. The tooth surface is carburized and has high wear resistance and high impact resistance. The tooth profile finishing treatment can improve gear accuracy and reduce noise. The inner hole does not contain a retainer. The full needle roller has high wear resistance and high strength.
Spiral bevel gear: The hollow shaft output reducer uses nickel-chromium-molybdenum alloy steel with surface carburizing treatment for wear resistance and high impact characteristics.
Ball bearings: Ball bearings are used as the fulcrum of the simply supported beam of the rotating shaft of the angular hollow shaft reducer, which has greater support and life than needle roller bearings.
Connecting flange: The corner reducer adopts modular design and is suitable for the assembly of various servo motors. The surface is treated with sandblasting anode or high-grade baking paint technology to improve the anti-oxidation effect.
Steering body: Special processing can ensure the assembly concentricity of the rotating shaft and the verticality of the input shaft. The hollow shaft output reducer body is designed with aluminum alloy to significantly reduce the weight of the overall structure. The surface is anodized to improve anti-oxidation treatment.
Double bearing design: Increase input stability.
Rotating shaft: The angle reducer is made of nickel-chromium-molybdenum alloy steel.
Input end overall structure: This bevel gear backlash adjustment structure can adjust the assembly backlash of the bearing and bevel gear at the same time. Patent number:.

The corner hollow shaft output reducer is used for precise positioning or reciprocating positioning to stably output power to automation equipment with minimal vibration, such as: printing industry, pipe bending equipment, spring machine industry, D inspection equipment , connect to the ball lead screw transmission mechanism