Taiwan TSUNTIEN high precision reducer

产地：

台湾

型号：

TTRAD-25E-103

平均使用寿命：

20000小时

Servo-specific roller reducer, Taiwan reducer, high-precision reducer, Taiwan roller reducer, Servo-specific precision reducer, Taiwan high-precision reducer, roller reducer, high-precision roller reducer, servo roller reducer, Taiwan servo reducer, Taiwan high Precision roller reducer has ultra-low backlash, high holding torque, large torque output, compact structure and high transmission efficiency.
- -
.
Taiwan roller reducer consists of:

Expand:
Expand the roller wave transmission and when the cam plate moves in one direction, the pressure will be pressed successively. The rollers in the lower roller plate mesh with the rollers of the fixed rack. Each roller on the roller plate of the roller reducer moves in reverse. The rollers are limited to the pitch of the roller plate and the roller gear is pushed and moves continuously. There is no dead point in the cycle.

Shock wave:
When the tooth profile of the fixed rack adopts circular rollers and the shock waver adopts a standard eccentric circle, the shock wave pattern of the servo precision roller reducer is similar to that of a slider crank. The laws of movement.

Output:
The roller is driven by the eccentric circle and rotates at a high speed while rotating at a low speed and decelerating. The roller can be directly output through the shaft pin in the roller drive roller. It is easy to be a quadrilateral, so the output speed of Taiwan roller reducer is equal to the low speed speed of the roller plate.

Combination:
The above mechanism is exquisitely combined. When the rollers in the roller plate are small, especially when the transmission ratio is large, the roller reducer usually cannot place the shaft pin in the roller. It is placed on a roller plate and its output speed remains unchanged. The mechanical loss of pure rolling contact at the basic position of the whole system is very small, so it can achieve extremely high transmission efficiency.
The difference between Taiwan’s high-precision roller reducer and gear reducer:

★ Taiwan’s high-precision roller reducer adopts multi-tooth meshing load-bearing power dispersion technology, which can greatly improve the impact load capacity .
☆For traditional spur gears or helical gears, all load impacts are only shared by one or two teeth.

★ The internal and external gear teeth of the servo-specific roller reducer are in contact with each other by sliding with complete rolling, and the transmission efficiency is particularly high.
☆The traditional gear transmission structure will cause uneven torque transmission due to wear or gear interference.
<=_
. Shenzhen Zhongzheng Precision Electromechanical Co., Ltd. specializes in supplying: Taiwan high-precision roller reducer series, r series, series, series, r series ultra-low backlash, high holding torque, low noise for joints Special roller reducer for arm.