Anyuan supplies secondary tungsten carbide blade cleaner cleaner

Secondary tungsten carbide blade cleaner is supplied at ex-factory price
Cleaner
The materials transported by the conveyor belt often contain sticky substances, such as coal dust, mud, and powdery materials, and some of them will stick to the conveyor belt during operation. On the surface, it cannot be completely removed when unloading. As the belt runs, it will stick to the roller, which will cause the following consequences for a long time
The material enters the roller shell, thereby increasing the wear of the bearing and the roller shell. Adhering materials will damage and roughen the surface glue of the conveyor belt, accelerating the damage of the conveyor belt.
When the material enters the tail wheel and the reversing roller, the material will stick to the surface of the roller. The more sticky the material, the greater the adhesion. This will cause the conveyor belt to deviate, increase the wear of the conveyor belt, and cause adverse consequences.
The material sticks to the conveyor rollers, which increases the friction on the rollers, sometimes causing damage to the conveyor belt surface rubber and the roller coating.
If the materials are not removed in time, a blanking area will be formed in the entire working channel, causing environmental pollution, increasing the amount of cleaning labor, and increasing enterprise costs.
Therefore, in order to ensure the normal operation of the belt conveyor, the attachments on the conveyor belt must be cleaned. If the cleaning device is good, the service life of the rollers, conveyor belts, etc. can be extended. It can be seen that the cleaner plays an important role in the belt conveyor that cannot be ignored. This type of cleaner is the second cleaner, installed at the bottom of the head drum of the belt conveyor. The position of the knife tip is within the range after the belt leaves the head drum. According to the material of the cutter head, it is divided into carbide cutter head second cleaner and alloy steel cutter head second cleaner (the overall dimensions are the same as ordinary cleaners). On low-speed belts, the second cleaner with alloy steel blades is generally used. For high-speed belts, the second cleaner with tungsten carbide blades should be used. The tungsten carbide material on the blade has high wear resistance. The blade is assembled in a split type to ensure good cleaning effect. The unique tensioning device enables the blade to adhere tightly to the belt even if the belt vibrates slightly, maintaining stable tension. The cleaner can also be adjusted and maintained without stopping the machine. The cleaner can be used in a complete set with the cleaner to clean away the remaining materials on the belt working surface, which greatly reduces the labor intensity of workers and the failure rate of equipment, and increases the production capacity of the conveyor
Our company's main products
Type Cleaner
Type Cleaner
Alloy Rubber Cleaner
Polyurethane Cleaner
Cleaner Brush
Electric Rolling Brush Cleaner
Rotation Cleaner
Electric roller brush cleaner
Rotary cleaner
Passive roller brush cleaner
Alloy spring roller cleaner
Empty section cleaner type cleaning Cleaner type cleaner Polyurethane cleaner Passive roller brush cleaner Roller brush cleaner
High temperature resistant cleaner
Brush cleaner
Coal mine cleaner
Coking plant cleaning Cleaner
Rotating vacuum cleaner
Empty section cleaner
Rotating vacuum cleaner
First-class polyurethane heavy-duty integral cleaner
Integral cleaner
Heavy-duty integral cleaner
Second-level tungsten carbide blade cleaner
Jining Anyuan Cleaner Factory
Contact Ji Xueqin
Mobile
Telephone
Fax< br/> Aliwangwang
@Box
@二道 Polyurethane Cleaner