Fully automatic hydraulic offset adjustment device offset adjuster manufacturer direct sales

Fully automatic hydraulic offset adjustment device
Deviation adjustment device factory direct sales
1. Overview The fully automatic hydraulic offset adjustment device produced and developed by our company does not require power. When the belt goes off track, the belt contacts the driving wheel to generate power, which drives the oil pump. The pressure is transmitted to the valve body through the oil line and then enters the oil cylinder to cause the piston rod of the oil cylinder to expand and contract to drive the offset roller frame to correct the belt. At this time, the movement direction of the offset roller frame forms a certain angle with the belt. The offset roller generates friction with the deviating belt to keep the belt running in the center, thereby achieving the purpose of automatically correcting the belt deviation. The fully automatic hydraulic belt deviation adjustment device automatically adjusts under the action of hydraulic force and has reliable working performance. Our factory will send personnel to provide on-site installation guidance. The belt can be adjusted in two directions. The fully automatic hydraulic belt adjustment device does not require daily maintenance and can be installed and used in any location. It is not afraid of water, dust, and materials and does not cause any damage to the belt. Field use in coal mines, power plants, metallurgy, etc. has shown that using the fully automatic hydraulic belt deviation adjustment device produced by our company to correct belt deviation is very effective and is an ideal device for preventing and controlling belt deviation. 2. Structure and principle The rectifier is composed of a drive wheel, oil, pump, oil cylinder, hydraulic valve body housing and frame. When the belt runs eccentrically, the belt contacts the check drive wheel. The check drive wheel drives the oil pump to press through the valve body integrated circuit, and then the program controls the oil cylinder piston rod to expand and contract to drive the self-aligning roller frame to deflect in the predetermined direction. At this time, the line of the self-aligning roller The friction force generated by the angle between the direction of movement and the direction of movement of the belt drives the belt to run in the center, thereby achieving the purpose of automatically and randomly correcting the deviation of the belt.
The company's main products:
D
Electric push rod
D
Electro-hydraulic push rod
Electro-hydraulic palatal gate, electric jaw gate Electro-hydraulic corner device driven inlet material opening size
Electro-hydraulic push rod driven electro-hydraulic push rod flat gate valve Electro-hydraulic corner device driven inlet material opening size
Electro-hydraulic push rod driven electro-hydraulic push rod flat gate valve
Electro-hydraulic corner device drive
Inlet opening size electro-hydraulic push rod drive
Electro-hydraulic push rod flat gate valve
Steel wire rope core stripping machine
Electric push rod
D
Electric push rod
D
Electro-hydraulic push rod
Explosion-proof push rod
D
Jaw gate
Electro-hydraulic Moving sector gate
Belt stripping machine
Wire rope stripping machine
Single side unloader
Double side unloader
DD
Type broken belt catcher Catcher
Broken belt catcher for belt conveyor
Broken belt protection device Broken belt catcher
Layered belt stripping machine
Belt conveyor deflector
Chain type one-way deflection adjuster
Fully automatic deflection adjuster
Variable groove angle unloader
Electro-hydraulic unloader
Plough type unloader
Contact person: Ji Xueqin
Mobile phone
Telephone:
Fax:
Ali Wangwang:
< =:@.>Email
:@. Integrated correction Device