Year1
- 耙装机：
- 60
The rake bucket rock loading machine has a simple structure, high rock loading efficiency, good reliability, and wide application. Not only can it be used in level tunnels, it can also be widely used in tunnel excavation with mine carts or skips for loading operations. It is also suitable for loading rocks in horizontal tunnels and inclined shafts with an inclination angle less than 10 degrees uphill and in corner tunnels - the rake bucket machine can be used with mine cars or skip buckets.
Overview of the rake bucket machine and the functions of each main component
Fixed wedge: It is fixed on the head end to suspend the tail wheel. It consists of a wedge body, a wire rope with a drogue sleeve, and a collar.
Tail wheel: It is hung on the fixed wedge collar to guide the return of the rake bucket. It is mainly composed of side plates, wear-resistant sheaves, hooks, mandrels and bearings. The rake bucket is pulled by the main rope and the tail rope in a reciprocating motion to pick up rocks. The rake angle is suitable for flat and inclined tunnels and is the main tool for rake machines to pick out rocks. The rake teeth are made of wear-resistant high manganese steel and can be raked after serious wear. teeth to replace.
, the operating mechanism, winch, guide wheel and feed chute, intermediate chute and unloading chute on the trolley. There is a lifting device in the middle of the feed trough, and the screw can be rotated to adjust the height of the dustpan mouth. In order to guide the rake in and out and prevent the gangue from being scattered on the hinged parts, there are also left and right guide baffles at the front and rear bends of the middle trough, which are removable and wear-resistant. The back of the curved plate unloading groove is equipped with spring bumpers and supporting feet for buffering.
The products produced by Jining Dali are of first-class quality, first-class service and the lowest price
.
Contact person:
Manager Su
Mobile phone
Mobile phone:
Telephone:
WhatsApp
