Year1
- 型号：
- P30
- 产地：
- 山东济宁
- 包装：
- 木箱
The guide wheel is installed at the rear of the bucket rake to guide and change the direction of the wire rope. It consists of side plates, pulleys, spindles and rolling bearings.
The tail wheel is suspended from the fixed wedge collar to guide the rake bucket back to the head. It is mainly composed of side plates, wear-resistant sheaves, hooks, mandrels and bearings.
Tail wheel introduction The tail wheel is used in conjunction with the rake bucket rock loader to control the traveling direction of the rake bucket of the rake loader
Structural description of the rake bucket machine
The fixed wedge is fixed on the head for suspension The tail wheel is composed of a wedge body, a wire rope with a drogue sleeve, and a collar.
The tail wheel is hung on the fixed wedge collar to guide the rake bucket back to the head. It is mainly composed of side plates, wear-resistant sheaves, hooks, mandrels and bearings. The rake moves reciprocally under the traction of the main rope and the tail rope to scrape rocks. The rake angle is 1 and is universal for flat and inclined tunnels. It is the main tool for rock rake machines to scrape rocks. The rake teeth are made of wear-resistant high manganese steel. The rake teeth can be replaced after serious wear.
According to different pulling forces, the tail wheels of bucket rake are divided into the following types. Tail wheels are commonly known as return sliders
Guide wheels
Tail wheels
Ton guide wheels
Tail wheels< br/> Tail wheel
Tail wheel
Due to the heavy workload and frequent friction of the tail wheel of the rake loader, the service life of the tail wheel is greatly shortened, and it is generally a wearing part in the mine.
Tail wheel structure
The tail wheel guide wheel is composed of a sleeve, an adjusting screw, a caster, a base, a steering seat and a pin. The sleeve is equipped with an adjusting screw, and one end of the adjusting screw is equipped with a rocker. handle, and the other end is connected to the caster frame through the adjusting nut. The caster frame is connected to the caster. The steering seat is connected to the base through pins. The base and the steering seat are respectively provided with corresponding holes with the same center distance. The shaped pins are inserted into the steering seat and the base in turn. Corresponding holes, type bolts secure the base to the rectangular tube of the trailer.
Function of guide wheel and tail wheel
The rake bucket rock loader is equipped with a pneumatic trolley cylinder. After the mine cart is full, the pneumatic trolley cylinder can be used to push the heavy cart out to reduce the labor intensity of workers and shorten the time. Adjust the vehicle time and increase the excavation speed. The tail wheel is hung on the fixed wedge to guide the tail wheel rope to return the rake bucket to the working surface.
Factory address Liying Industrial Park, Rencheng District, Jining, Shandong
Sales phone number
Consultation
WhatsApp
