Supply Put WMZ-200 (plug-in) digital display thermometer Beijing thermometer

(Plug-in) Digital Display Thermometer Beijing Digital Display Thermometer Counter Thermometer Manufacturer Digital Display Thermometer Price Digital Display Thermometer Content Introduction:
Beijing Pute Instrument Complete Set Factory - (Plug-in) Digital Display Thermometer 1. Technology Parameters:
. Dimensions: Diameter * Diameter * Hanging type
Panel type
2. Accuracy level.%.%
3. Resolution: below ℃, above ℃ The negative sign displayed below ℃ is out of the measurement range or the sensor is open or short circuited. The instrument displays (-) or.
4. Display mode: three and a half digits: .(.) inch D digital display, portable 3 and a half D LCD display
5. Working environment: temperature - ℃ - ℃ humidity %
6. Power supply: D:%%D: battery powered
7. Sensor protection tube pressure resistance: carbon steel. Stainless steel
8. Product use and precautions:
Please place the sensing signal away from ℃ The above heat sources cannot be parallel to the power cord to avoid interference. Do not pull the sensor line hard. The temperature measurement range cannot exceed the calibrated measurement range. The sensor protection tube should not be immersed in liquid together with the lead end. The lead end should not be exposed to an environment above ℃ for a long time. Otherwise, the signal line or sensor will be damaged and the instrument display will be abnormal.
.If the measurement medium is corrosive or is greater than the pressure resistance of the sensor, please add a protective sleeve or customize a stainless steel protective tube.
.The sensor protection tube of this instrument can be equipped with various specifications of threads as required. Before screwing in, turn the thread in the opposite direction to the screwing direction - then screw in the thread to avoid winding the signal wire. Installation is complete and connected. The power meter enters the measurement display state.
.When the display screen is dim and the reading is unclear, the battery should be replaced in time. When the meter is not used for a long time, please remove the battery to avoid battery leakage.