The brazed plate heat exchanger is a new type of high-efficiency heat exchanger that is composed of a series of stacked metal sheets with a certain corrugated shape. Thin rectangular channels are formed between the various plates to exchange heat through the half-plates. Compared with conventional shell and tube heat exchangers, its heat transfer coefficient is much higher under the same flow resistance and pump power consumption. It has a tendency to replace shell and tube heat exchangers within the applicable range.
d=r >Application scope:
This model of brazed plate heat exchanger is mainly used for refrigeration evaporator condenser and oil cooling steam heating with relatively large flow rate.
->
--d=> < ->-r >Shanghai Jiangxing Chemical Equipment Co., Ltd.
Welded plate heat exchanger
d=r >r series welded type Plate heat exchanger
(hereinafter referred to as heat exchanger) is a combination of the advantages of higher temperature and higher pressure resistance of tubular heat exchanger and high heat transfer efficiency of detachable plate heat exchanger. It has the advantages of light weight, It has the advantages of high heat transfer coefficient, low resistance, not easy to scale and great adaptability. In addition, the fully welded plate heat exchanger is a plate heat exchanger with a wide flow channel. It is suitable for process requirements with small temperature differences and large flow rates, and is suitable for fluids with particulate matter and high viscosity. The heat exchanger is mainly composed of plates, end plates, inlet and outlet pipe boxes and heads.
--d=> < ->-r >Shanghai Jiangxing Chemical Equipment Co., Ltd.
Detachable plate heat exchanger
d=r >【r _ Series] [r series] [- series] [-r series]
d=r > The above series of plate heat exchangers are a new type of energy-saving heat exchange device with high heat transfer effect, compact structure and small floor space. Small, easy to operate, easy to clean, disassemble and maintain, and easy to change the heat exchange area or process combination.
d=r >The herringbone corrugated medium flow of the plate forms a turbulent flow state viscose sealing gasket. The heat transfer coefficient can be as high as ~/.℃. < Products are suitable for chemical industry, machinery, food, beverage, medicine, residential heating, hot water supply, air conditioning and other sectors.
d=r >Product introduction:
The plate heat exchanger is first selected by a microcomputer according to the process conditions of each working condition. The frame is composed of splints, guide posts, fixing bolts, etc. Each plate has an angular hole connected with the corresponding pipe to alternately distribute the two fluids to the respective flow channels between the plates. The two fluids always exchange heat energy under pure countercurrent conditions, causing the thin fluid flowing between the plates to produce a turbulent state and forced convection heat transfer. At the same time, the thermal resistance of the liquid film is reduced, making the overall heat transfer coefficient of the plate heat exchanger particularly high and the resistance drop very low. Many support points are formed between the heat transfer plates, making it sufficient to withstand the pressure of the liquid. < The selection engineer uses microcomputer software to accurately provide equipment selection under various working conditions and calculations of the model, and the verification parameter table determines the overall dimensions and model of the equipment based on the operating pressure.
->
--d=> < - >-r >Shanghai Jiangxing Chemical Equipment Co., Ltd.
Volume plate heat exchanger
d=r >Volume type heat exchanger uses cold and hot fluids to alternately flow through the heat storage in the regenerator. The heat exchanger is a volumetric heat exchanger in which the cold and hot fluids are separated by solid partition walls and exchange heat through the partition wall. Therefore, it is also called a surface heat exchanger.
d=r >According to different heat transfer methods, it can be divided into three categories: hybrid volumetric heat exchanger, thermal storage volumetric heat exchanger and dividing wall volumetric heat exchanger
d=r >One type The volumetric heat exchanger is mainly composed of a body, a steam coil assembly, a steam inlet and outlet, and a hot and cold water inlet and outlet. In order to prevent corrosion on the surface of the body, the utility model sprays an anti-corrosion alloy layer on the surface and brushes the alloy layer. The paint layer is formed and the original pipe box steam coil is eliminated and the steam coil is directly connected externally through the flange, so that the utility model has the characteristics of simple and reasonable structure, long service life, good heat exchange effect and energy saving.
d=r >A volumetric heat exchanger which consists of a body, a steam coil assembly inside the body, a steam inlet and outlet, a cold water inlet and a hot water outlet. It is characterized by the inner surface of the body. A layer of high-temperature melted anti-corrosion alloy layer is sprayed on it. Volumetric heat exchangers are made by enlarging the volume of ordinary floating coil heat exchangers. Mainly used in hot water supply systems. Generally, an automatic temperature control device should be installed at the outlet to ensure the appropriate water supply temperature for bathing water or sanitary hot water. In addition to having all the advantages of ordinary floating coils, it can also store a certain amount of hot water to ensure timely supply of hot water.
->
--d=> < ->-r >Shanghai Jiangxing Chemical Equipment Co., Ltd.
-Type plate heat exchange unit
d=r >-Type plate heat exchanger Heat unit:
d=r >-Type plate heat exchange unit is an integral heat exchanger composed of plate heat exchanger, circulating water pump, water supply pump, electronic control device, dirt remover, pipes, valves, instruments, base, etc. Thermal equipment.
d=r >Users only need to connect the primary heating medium, heated system, and supply water interfaces of the unit and turn on the power to use.
d=r >Applicable to various media such as steam-water, water-water, water-oil, oil-oil, etc. It has the characteristics of superior performance, reasonable layout, compact structure, safe and reliable operation, and easy installation and operation.
d=r >-Type plate heat exchange unit is equipped with an automatic control system according to user needs. Its functions include water replenishment, frequency conversion and constant pressure, temperature automatic control system, outdoor temperature compensation, microcomputer LCD display of primary and secondary inlet and outlet temperatures, pressures, etc. The programmed fully automatic control system can be selected according to the actual user requirements to achieve unattended control. There is an interface in the control cabinet for network control.
<