6kw gas oil generator manufacturer price quotation

Gas and oil generator manufacturer price quotation
About the general maintenance method of kilowatt small gasoline generator
After the new generator or the sealed generator is run in (the first hours), the following maintenance work needs to be carried out
Clean or replace the air filter
Replace the engine lubricating oil
Replace or clean the filter element of the lubricating oil filter
Re-tighten the bolts and bolts of each part
New generators should be avoided as much as possible If there is a sudden increase in load or high-speed operation, try to use lubricating oil recommended by the manufacturer. Do not mix lubricating oils of different brands. Lubricating oil contains various additives. Mixing lubricating oils of different brands will reduce the lubrication performance and cause moving parts abnormal wear and tear. When filling oil into the fuel tank, there should be a filter at the oil filling port, and it is better to put a filter cloth on it. The fuel should first be allowed to stand in the tank for more than an hour to allow water and impurities to settle before use. The drain plug of the daily fuel tank should be opened regularly and drained to the bottom. of water and sediment. Regular inspection and planned maintenance are the key to extending the service life of the engine. The inspection cycle and inspection items should be appropriately adjusted according to the purpose, usage conditions and properties of fuel and lubricating oil. If necessary, inspection should be carried out in advance, and it should be carried out by professional personnel as much as possible. technicians to complete regular inspections and maintenance.
Type
Generator rated output power
Maximum output power
Rated power/
Rated frequency/
DC output
Power factor
Phase number single phase
Number of poles
Excitation mode capacitor
Insulation level
Engine engine model/
Engine type
Single cylinder, tilt type, four-stroke , air-cooled, gasoline engine
Bore stroke
Displacement
() Maximum output
Cooling method forced air cooling
Starting method hand start/electric start
Lubrication method splash lubrication
Oil capacity
Lubricating oil model/(grade or above)
Fuel model unleaded gasoline for vehicles
Speed/
Unit parameter structure type open frame< br/> Fuel tank volume/continuous working time/