Where can I buy imported diesel generator sets in Kashgar? Kashgar Volvo generator manufacturer

Causes and troubleshooting methods for difficulty in heating up the diesel generator engine
After a cold start or while driving, the engine temperature is difficult to rise to the normal operating temperature range, and the engine is too cold. This is mainly due to the automobile insulation device used in cold seasons or areas. and thermostat due to poor technical condition.
Reasons
① The thermostat valve is not closed tightly, and the engine heats up slowly after a cold start, leaving it in a cold state for a long period of time, especially in winter.
② The insulation device has poor performance and loses its insulation effect on the radiator. The cold air flowing through the radiator and engine cannot increase or decrease according to the needs of the engine's thermal conditions, causing the engine to be overcooled.
③ The fan with clutch loses its function of adjusting the fan speed due to malfunction, resulting in excessive air volume and overcooling of the engine.
Diagnosis and treatment methods
① First check whether the working performance of the insulation device in front of the engine radiator is good. If it is defective, it should be adjusted or repaired so that the shutter can work freely and flexibly adjust with the temperature of the engine.
② Troubleshoot the silicone oil clutch fan.
③ Check whether the working performance of the thermostat is good according to the inspection method of the thermostat. If it is found that the main valve cannot be closed, it should be replaced.