Essen mixer mixer deflection angle effect

电源：

～380V 50HZ

功 率：

37KW 变频电机

Under a typical installation angle, the flow field in the stirring tank is a large circulating flow composed of an internal high-speed annular upflow around the center of the stirring tank and an external low-speed downflow along the wall of the stirring tank. The horizontal deflection angle not only increases the average velocity of the entire stirred tank flow field, which is beneficial to the suspension performance of solid particles in the entire stirred tank, but also increases the area of the high-speed fluid area at the bottom of the tank, thereby improving the solid phase deposition condition at the bottom of the tank. The vertical deflection angle increases the area of the high-speed fluid area at the bottom of the tank and exerts a certain scouring effect on the bottom of the tank, thereby further reducing the possibility of solid phase deposition at the bottom of the tank. When there is no installation angle, the area with the highest solid content at the bottom of the tank is mainly accumulated in the area below the mixer. When the mixer is at a horizontal or vertical deflection angle, the solid content rate is distributed evenly in most areas of the tank bottom. Only a small area with a higher solid content rate exists on the wall area on the right side of the mixer at the bottom of the tank. In this installation The solid-liquid suspension performance of the entire stirring tank and the prevention of solid phase deposition at the bottom are optimal under the deflection angle. Contact person Mr. Liu’s phone number