ZXDL101N Generator internal cooling water resin Generator fixed cooling water treatment special resin

Generator inner cooling water resin is a special resin for generator constant cooling water treatment
Generator inner cooling water special resin is a ready-to-use special resin developed and produced by our company based on the small mixed bed device of current power plants in my country and the careful water discharge requirements. Resin, the on-site power plant system equipment is complete, and the desalted water meets the water replenishment requirements, which can meet the power standards. Used for the treatment of circulating water for cooling in the generator. It is suitable for ion exchange treatment and slightly alkaline ion exchange treatment of cooling water in generators. This technology has obvious technical advantages compared with the supplementary condensate water method and the corrosion inhibitor treatment method. By increasing the value of the internal cooling water, the hollow conductors are in a relatively passivated state, reducing the corrosion rate of copper, and at the same time, the mixed bed is also It plays the role of bypass filtration, intercepting the original copper oxide particles and other corrosion products in the system, reducing the possibility of wire rod blockage. The treated effluent can simultaneously meet the requirements for electrical conductivity and copper content in the "Technical Requirements for Cooling Water Quality and Systems in Large Generators".