Foam cutting machine manufacturer Electric heating wire foam cutting machine manufacturer in stock

外形尺寸：

3500*2500*2000

规格：

HXSPQ-3100II

表面粗糙度：

0.005

The foam cutting machine of Botou Hengxiang Company sells well in domestic and foreign markets due to its reasonable structure, unique and exquisite manufacturing technology, and reliable quality, and is highly praised and trusted by users. We will work hand in hand with customers to create brilliance with more advanced technology, more favorable prices, and faster delivery times.
The foam cutting machine is equipped with a transformer and is electronically regulated, and the voltage output is adjustable. The cutting frame can be equipped with a heating wire, which can cut the same image or text at the same time. The CNC foam cutting machine uses a brand-name computer. The drawing and cutting software interfaces used have both Chinese and English logos and recognizable icons. It is easy to operate. The user only needs to draw the picture in the drawing software and convert it into the cutting code in the cutting software and install it. will work automatically.
The mechanical part of the foam cutting machine consists of a lifting gantry (axis frame), a horizontal movement platform (axis workbench) and a vacuum cleaner part.
①. The gantry lifting frame is the main body of the entire wire cutting system. The lifting part is composed of guide posts, guide sleeves, lifting screw nuts and transmission parts. The cutting part is composed of a gantry, cutting wire wheel shaft, main wheel, motor, wire knife and wire knife tensioning pneumatic device. Its operating principle is that the lifting transmission rod tooth chain is connected to the shaft stepper motor, and the motor drives the lifting part and the wire knife guide wheel frame to move up and down on the guide column. The gantry is equipped with upper and lower limit stroke control switches.
②. The horizontal motion platform frame is a platform device for workpiece processing. It consists of a shaft transmission system, studs, nuts and a working platform. The platform is supported by four sets of directional rails and directional wheels on the rail base. The shaft transmission system The stepper motor drives the sprocket to drive the nuts and studs to move the platform in the axial direction, thereby achieving coordination with the axis movement.
Botou Hengxiang specializes in the production of foam cutting machines. It has a multi-person after-sales service team and a complete after-sales guarantee to ensure that every customer problem is feedback and dealt with in a timely manner. The factory keeps sufficient spare parts for profiling cutting machine products all year round to satisfy users. Any time maintenance and repair needs.
Inspection of the foam cutting machine. Check whether there is any garbage in the main air inlet of the foam cutting machine, and whether the valves and pressure gauges are working properly. Check whether all air pipe joints are loose and whether all pipe straps are damaged. Tighten or replace them if necessary. .Check whether all transmission parts are loose, check the meshing of gears and racks, and make adjustments if necessary. Loosen the tightening device and push the pulley by hand. It should come and go freely. If there is any abnormality, adjust or replace it in time. Check the clamps Check whether the tightening block, steel belt and guide wheel are loose, and adjust the tightness of the steel belt if necessary. Check the strong power cabinet and operating platform to see whether the fastening screws are loose. Use a vacuum cleaner or hair dryer to clean the dust in the cabinet. Check whether the terminals are loose. (Please refer to the relevant electrical instructions for specific operations}. Check the performance of all buttons and selector switches, and replace damaged ones
Foam cutting machine manufacturer electric heating wire foam cutting machine manufacturer in stock, ) consultation hotline
.