Hot water heating Jiangsu air energy heating heat pump hot water heating project

The starting and shutting down of the air source heat pump is realized by the set temperature of the unit. When the unit has not reached the set temperature, the unit will be in the on state. When the unit reaches the set temperature, the unit will be in the shutdown state. We can see that the start and stop of the unit is directly related to the set temperature. When we use the unit, we should set the temperature reasonably according to the user's requirements. 1. What will happen if the air source heat pump runs for a long time
Long-term operation of the air source heat pump will only be harmful to the unit itself, and it will not be beneficial. Long-term operation can easily cause the electrical components to age, short circuit, or burn the compressor. Affects the service life of the unit. Practice has proved that units that run for a long time often have a shorter service life than those that operate within a reasonable range. The failure rate is about twice as high. When the unit is operated at a reasonable time, the service life of the unit is often as high as 10 years. The above failure rate is low.
2. Reasons for long-term operation of air source heat pumps
The unit selection is too small, commonly known as the calf pulling the cart. Many dealers, due to unreasonable selection, choose too small a model. When the user needs heat, the unit cannot provide enough heat, causing the unit to run for a long time, or in order to ensure the profit point of the project, the air source is reduced. The heat pump price, etc. Furthermore, in order to reduce the initial investment cost, the user chooses a unit that is too small, causing the heat production of the unit to be unable to meet the user's heat consumption requirements, causing the unit to run for a long time.
Due to environmental and climate reasons, air source heat pumps generate heat by absorbing heat in the air, so as the ambient temperature decreases, the heat production decreases. Many dealers, during the selection process, The operation conditions of the unit in winter are not taken into account. The unit operates at a lower temperature, absorbs less heat from the air, and obtains less heat from a single ring of the unit. In order to achieve the same heating capacity, the unit will work longer, so it is recommended to select a model. The normal design working time during the process is generally between ~ hours.
. The installation of the project is unreasonable. For example, during the installation process, corresponding measures for ventilation of the unit were not taken, or the exposed hot water pipes did not undergo corresponding insulation measures, allowing the heat to dissipate invisible. This problem This is also the reason why the air source heat pump runs for a long time, so the installation of the unit must be carried out by the manufacturer or a professional team.
Jiangsu Omailan Equipment Installation Engineering Co., Ltd. (Omailan brand)
Fortune direct hotline, mobile phone
Online consultation, contact person: Ms. Wu