Energy-saving wood dryer heat pump air energy wood drying equipment wood constant temperature dehumidification equipment

Composition of drying equipment The dryer is composed of a heat pump unit and a drying room. It is equipped with patented insulated copper pipes, kiln exchangers, stainless steel kiln bodies, American Copeland compressors, circulating fans, humidity control systems, and dehumidification systems. Electric auxiliary system, measurement control system, process execution system, etc.
.Heat pump drying unit
Using American Copeland compressor to absorb the heat in the air and transfer it to the drying kiln to achieve wood drying.
.Drying room
The drying room is made of stainless steel insulation panels and is tightly framed by aluminum alloy profiles. It is beautiful, durable, easy to install and move, has good thermal insulation effect and low heat loss.
.Heating equipment
?The main body of the heating system is the heat exchanger. The heater used is a copper-aluminum composite fin heater. The fins have no wrinkles, small air flow resistance, high heat transfer efficiency, corrosion resistance, good performance and long service life.
.Ventilation and dehumidification equipment
?The window that realizes the convection exchange between the hot and humid air in the drying kiln and the outside air, and maintains the execution of the requirements of the wood drying process in the drying kiln, including the cold air inlet door and the moisture discharge port . The air intake and exhaust system is an automatic system, and each set of moisture removal windows is equipped with a separate moisture removal motor.
, detection, control system
The detection system readings are accurate and reliable. Detect the moisture content of wood and the temperature and humidity of the medium.
The control system controls the temperature and humidity of the medium, and the circulation speed is determined by the fan.
, Insulation copper pipe
Insulation copper pipe is the connecting component between the heat pump unit and the drying kiln. Generally, a large amount of heat is lost during this process. Our company is equipped with patented insulated copper pipes. The insulation layer is made of polyurethane foam and has external pipes. After installation, it is beautiful and atmospheric, has good insulation effect, has very little heat loss, is corrosion-resistant, has a long service life, and the insulation is not affected by the outside temperature. The heat collected by the heat pump is transmitted to the drying room through insulated copper pipes. The temperature difference is small, and the energy efficiency ratio is % higher than that of ordinary heat pump dryers.
Consultation phone number