Supply epoxy intermediate coating (economical type)

Features
, solvent-free, environmentally friendly
, fast curing, shortening the construction period.
Usage
, Can be mixed with quartz sand or quartz powder, used as a general mid-coat for Yongzhi brand epoxy floor coatings, to improve the strength and flatness of the floor coating
, excellent sealing properties, especially It is suitable for sealing capillary pores before the construction of epoxy topcoat
. It can be prepared with quartz sand or quartz powder, and can also be used directly to fill holes in the substrate.
Pour the ingredients into the mixing barrel according to the proportion and mix evenly. Then pour quartz sand or quartz powder, stir evenly and then scrape it on the base surface after the primer construction is completed.
Construction method
Scrape sand (scrape sand when thickness or fullness is required, otherwise do not use it)
Directly scrape with a gray knife or adjust .~ times quartz sand (or quartz powder ) scrape.
The reference dosage is about ./㎡ (add .~ times quartz powder putty) or about ./㎡. (add ~ times quartz sand).
Tool cleaning Yongzhi epoxy thinner.
It is recommended to use this product at temperatures above ℃ during construction. To avoid condensation of water vapor, the relative air humidity should be less than %. Good ventilation should be maintained during construction and drying in confined spaces.
Precautions During construction, the environment must be clean, with dry and dust-free air.
Storage Sealed and stored in a cool and ventilated place, protected from moisture, sun and freezing.