Concrete sealing and curing agent (domestic)

Product name Concrete sealing and curing agent
Smart concrete sealing and curing agent is a nano-scale lithium-based water-based inorganic concrete sealing and curing agent formulated with silicate and other ingredients using special technology. It can densify concrete and show excellent quality in improving the overall surface strength, wear resistance, anti-seepage, dust-proof, anti-corrosion, anti-static, anti-skid and anti-aging properties of concrete, extending the service life of concrete.
Construction technology
Requirements for concrete pouring The strength design requirements of the concrete floor should be above and not below.
. Clean the ground. For newly poured concrete (including wear-resistant hardened floors), use a trowel to smooth and compact it. It should be cured for at least one day (use water for curing). Polish and remove white alkali and floating dust on the surface. For old concrete floors, it is necessary to clean the surface of oil stains, coatings, loose structures and other substances that affect penetration, and clean the floor thoroughly.
Use hardener to fully wet the pre-treated concrete surface and keep it moist (there is free liquid when touching) for 10 minutes. You can use brushing, roller coating or spraying. During this period, you should use a brush, mop or Tools such as rollers constantly rub the surface so that the hardener can penetrate into the concrete more evenly and effectively. (Yongzhi concrete sealing hardener should be shaken well before use. The construction temperature is ℃℃)
When the temperature is high, the hardener on the surface will quickly dry and turn white due to water evaporation. A small amount can be sprayed Water dilutes the hardener which dries and turns white, but the amount should not be used too much.
To remove the remaining liquid, use a plastic scraper or mop to remove the remaining liquid on the surface.
For floors that penetrate quickly, the steps should be repeated according to actual needs after drying.
After curing and drying for a few hours, the ground can be used normally. The active ingredients of the penetrating hardener gradually react with the cement. Regular use of a wet mop to clean the ground can promote the gel that penetrates into the concrete to continue to react, and the best strength can be obtained earlier.
A polished, flat and compact floor will produce a certain luster after being used for a period of time. If polishing can make the floor immediately achieve a higher gloss effect, a polishing machine can be used to polish the floor after using hardener for treatment and maintenance.
(Note that the above are basic construction methods. Different construction methods will be adopted according to different conditions such as the type of base surface, degree of looseness, aging, etc., until the ground reaches the best performance)
Construction dosage
Depends on the porosity of the concrete base. The dosage varies from ./.
Scope of application
Yongzhi concrete sealing and curing agent can be used in all concrete protection projects, especially suitable for places with dust-free environment requirements. Such as various types of concrete projects that require heavy pressure, wear resistance, anti-seepage, and dust-proof production workshops, large supermarkets, grain warehouses, cold storages, parking lots, food production bases, gas stations, airport runways, stadiums, docks and other concrete projects.