Small arc double layer tile press 850 double layer color steel tile press double layer tile press manufacturer

Double-layer laminated tilebr/> 1. Technical parameters
.Installation dimensions
.Number of forming passes/row/row
.Roller material steel
.Roller electroplating layer thickness
.Cutter material
.Forming speed
.Electronic control system industrial computer control
.Host power
.Hydraulic station power
.Plate thickness
/> . Make the roof plate
2.
Debugging of the tile press
First, make the four corners of the front and rear rows of the color steel equipment machine the same height from the upper end of the bottom shaft of the main frame , then find a line to straighten from the first row to the last row, check whether the lower shaft is in a straight line, and adjust the left and right sides of the lower shaft to be horizontal.
Find the center of the first and last rows of the color steel tile equipment, then tighten the lock nuts on both sides, draw a straight line front and back at the center of the middle wheel, and adjust the gap between the upper and lower shafts. After that, you can adjust the machine along the straight line.
, the debugging method of the deviation of the pressure plate of the color steel tile equipment tile press, such as the plate runs to the right, pads the left corner (feeding rack), or falls to the right bottom level (which axis is deflected and which axis bottom level , the upper shaft falls with the bottom shaft.
Color steel tile equipment can also be called roller cold bending, that is, on a row of series forming rolling mills, metal plates and metal plate strips are connected to bend them in sequence. , a plastic processing method that processes a flat plate into the required cross-sectional shape. Roller cold bending (color steel tile equipment) has been used in bicycle rims, umbrella frame manufacturing, etc.
Fireproof color composite sandwich panel The surface material and insulation material are non-combustible materials, which can fully meet the requirements of fire protection regulations.
Quick installation. The composite panel is light in weight, spliced installation and can be cut at will, which determines its ease of installation, which can greatly improve Benefits, saving construction period.
Durability Various studies have shown, and it has been widely used abroad for more than 10 years to prove that the shelf life of colored steel plates treated with special coatings is 20 years. After spraying anti-corrosion coating every year, the life of the plates can reach more than 20 years.< br/>The clear lines of beautiful profiled steel plates are available in more than dozens of colors, which can meet the needs of any style of building to achieve satisfactory results
)