Year1
The B series submersible mixers and series submersible flow pushers are independently developed based on the introduction of Swedish Flygt submersible electrode sealing technology. After years of practical exploration, two series of products, mixing and low-speed push flow, have been formed. Due to its innovations in type, structure and experimental methods, the overall performance of this product has reached the level of similar foreign products. Mixing series mixers are suitable for mixing suspended liquids in special mixers in soda water plants and industrial processes.
>
Structural Features>
The mixing and stirring series products use multi-stage motors and direct-coupled structures with low energy consumption and high efficiency. The impeller is precision cast or Stamping molding, high precision, large thrust, beautiful and smooth appearance, compact structure. >
The low-speed push flow series products adopt cycloidal pinwheel reducer, which is equipped with small power, low speed, large impeller diameter and wide service area. The impeller is made of polyurethane material and aluminum alloy. It has high strength and strong corrosion resistance. In addition to its stirring function, it can also push flow and create water flow. >
The motor windings of the submersible mixer are grade 1 insulated and the protection grade is grade 1. Used together in the aeration system of the sewage plant, the energy consumption of the system can be greatly reduced, the oxygenation amount is significantly increased, and precipitation can be effectively prevented. According to process requirements, direct-coupled submersible mixing can be equipped with a deflector. >
>
Scope of application>
The mixer should be able to operate normally and continuously under the following conditions: >
. The maximum medium temperature does not exceed ℃>
. The value of the medium is between ~>
. The liquid density does not exceed/>
. Long-term diving operation, the diving depth is generally not exceeded. >
Performance characteristics>
. Type B mixer has compact structure, simple operation and maintenance, convenient installation and maintenance, and long service life. >
.The impeller has the best hydraulic design structure and high working efficiency. The swept-back blades have a self-cleaning function to prevent debris from entanglement and clogging. >
. Mixed use with an aeration system can significantly reduce energy consumption, significantly increase oxygenation, and effectively prevent sedimentation. >
. The insulation level of the motor winding is 100% and the protection level is 100%. It uses imported bearings and a unique patented electrode anti-condensation device to make the motor work safer and more reliable. >
.Two mechanical seals, made of tungsten carbide and tungsten carbide. All exposed fasteners are stainless steel. >
System>
.
. The angle can be adjusted horizontally and vertically>
.The length of the guide rod is fixed in meters>
System>
. The bottom plate is kept parallel to the pool wall and close to the pool wall>
. >Use when using meters>
. The angle can be adjusted in the vertical direction, but not in the horizontal direction>
System>
Note:. Can rotate around the axis in the horizontal direction>
. When > meters, add a support frame in the middle of the guide rod>
. The support frame and lower bracket are connected with the pool wall, The connections at the bottom of the pool are all made of expansion bolts>
. Please provide the dimensions so that the factory can determine the size of the guide rods and the number of support frames during processing>
System>
Note: It can rotate around the axis in the horizontal direction>
. It can rotate around the pin axis in the vertical direction>
. When > meters, in Add a support frame in the middle of the guide rod>
. The support frame and lower bracket are connected to the pool wall and bottom with expansion bolts>
. Please provide the dimensions provided by the customer. This allows the factory to determine the size of the guide rod and the number of support frames during processing>
System>
Note: It can rotate around the axis in the horizontal direction>
. When > meters, add a support frame in the middle of the guide rod>
. The support frame and lower bracket are connected to the pool wall and bottom with expansion bolts>
< br/>. Please provide the dimensions so that the factory can determine the size of the guide rods and the number of support frames during processing>
System>
Note: It can be wound in the horizontal direction Rotation>
. Please provide the dimensions so that the factory can determine the size of the guide rod and the number of support frames during processing
WhatsApp
