Liaoning chicken, duck and goose feces separator, Liaoning pig farm feces and sewage treatment equipment

Liaoning chicken, duck and goose feces separator, Liaoning pig farm feces sewage treatment equipment) br/> ) Rotary squeeze solid-liquid separator product introduction
Pig manure dehydrator is used for chickens, pigs, cattle, horses and various Residue-liquid separation equipment for high-concentration organic wastewater such as intensive animal manure, distiller's grains, medicinal residues, starch residues, sauce residues, kitchen waste, slaughterhouses, etc.
The machine is small in size, simple to operate, easy to install and maintain. The investment recovery is fast, the decontamination ability is strong, and there is no clogging. The moisture content of the separated feces residue is between %.
br/> The working principle of the screw extrusion solid-liquid separator
br/> Use a submersible pump to lift the raw manure water into the pig manure dehydrator, and squeeze the auger to remove the biogas sludge. The liquid is gradually pushed to the front of the machine body, and at the same time, the pressure on the front edge is continuously increased, forcing the moisture in the material to squeeze out of the mesh screen under the action of the side pressure belt filter, and flow out of the drainage pipe. The work of the pig manure dehydrator is continuous. The material is continuously lifted into the body, and the pressure on the front edge continues to increase. When it reaches a certain level,
the discharge port will be opened.
Extrude the extrusion port to achieve the purpose of extrusion and discharging. If too much fecal water is pumped in, it will be discharged into the original septic tank through the overflow pipe, which also plays a role of stirring. The wastewater separated by the screw extrusion silver fox can be directly sent to the sedimentation tank, etc.
In order to control the discharging speed and moisture content,
the counterweight block under the main machine can be adjusted to achieve a satisfactory and appropriate moisture content.
) Features of the screw extrusion solid-liquid separator
)
The screw extrusion solid-liquid separator
has small size, low rotation speed, simple operation, It is easy to install and maintain, cost-effective, high efficiency, quick investment recovery, and does not need to add any flocculant. The high-strength spiral shaft, corrosion-resistant alloy spiral blades, and screens used by this machine are made of high-quality stainless steel. The spiral dragon blades are made of special Handling, the service life is
'
times that of other similar products.