Chengdu horizontal mixer horizontal putty powder mixer

Guangzhou Huaxing Machinery This series of mixers occupies a small area, is easy to operate, is simple to maintain, has high uniformity and small residue. It is suitable for dry and wet feed mixing, wet grass and feed processing, and is suitable for mixing sticky substances. Internal and external wall insulation mortar, anti-crack mortar, plastering mortar, bonding mortar Mixed production of dry and wet powder materials by small enterprises such as coatings, chemicals, veterinary drugs, and pharmaceuticals.
Working Principle
The material is mixed quickly and efficiently by the movement of the spiral belt of the stirring shaft, causing the inner and outer spiral belts to turn the material over a wide range. The inner spiral belt moves the material to both sides, and the outer spiral belt moves the material from both sides. The lateral inward movement causes the material to be mixed back and forth, and some of the material is pushed by the spiral belt to move axially and radially to form a convection cycle. Due to the above-mentioned movement, the stirred materials are quickly and evenly mixed in a short time.
When the machine rotates backwards and forwards, you can add materials into the machine. When it rotates reversely, it discharges materials and pushes the materials out of the machine.
Output

Dimensions

Capacity

Stirring power

Lifting power

Lift height


**

Square





**

Fang





**

Fang



Meters

Structural features
The machine is a horizontal cylinder with a unique structure, smooth operation, reliable quality, low noise, long service life and easy installation and maintenance. And there are a variety of mixer structures and multi-functional mixing equipment with a wide range of uses. The mixing speed is fast and the mixing uniformity is high. Especially the scraper can be installed on the sticky spiral belt to be more suitable for mixing thick paste. Under the mixing requirements of different materials (special materials must be cleaned after each mixing
Picture of professional dry powder fine powder putty powder bedroom mixer with elevator. The double-spiral mixer mixes very evenly
Machine specifications
Horizontal ribbon putty powder mixer is also called horizontal ribbon putty powder mixer
The working principle of the putty powder mixer. When the putty powder mixer works, the material in the putty powder mixer undergoes compound motion under the action of two rotors in opposite directions. The blades drive the materials to rotate counterclockwise along the inner wall of the machine trough. On the other hand, they drive the materials to flip left and right. In the weightless zone of the overlapping shape of the two rotors, in this area, the materials can float up and be in an instant weightless state regardless of the shape, size and density of the materials. The material forms an all-round continuous circulation in the machine tank, turning and shearing with each other to achieve the effect of rapid, gentle and uniform mixing
Two-ton horizontal mixer meter feeding diameter
Appearance dimensions** meters at both ends and mm in the middle Meter channel steel support
Capacity square weight single-axis double helix
One ton circular horizontal mixer meter feeding diameter
Appearance dimensions meters** two ends meters millimeters
middle The square meter channel steel support capacity is about the weight of the single-axis double helix
Half-ton circular horizontal mixer feeding diameter
Appearance dimensions** Two ends, meters and millimeters, the middle millimeter channel steel support
Capacity Approximately kilogram weight single shaft double spiral
Kilogram circular horizontal mixer feeding diameter
Appearance dimensions** Two ends mmm millimeter middle millimeter channel steel support
Capacity approximately kilogram weight single Axis Double Helix