MB04 continuously variable transmission plus one-stage gear speed regulation range 200-40 reduction ratio 5

Shanghai Nuoguang produces and supplies continuously variable transmission power. Speed range/output torque. Reduction ratio. This represents one-stage gear reduction (both vertical and horizontal types can be installed). Here are some things to note. The traction oil of the continuously variable transmission is fully added when it leaves the factory. There is no need to add more oil. The continuously variable transmission must not be started without oil. The operating environment temperature is ℃~+℃, and the internal temperature rise of the machine does not exceed ℃. The maximum temperature shall not exceed ℃. The speed of the continuously variable transmission must be adjusted when the machine is turned on. The handwheel should not be turned too fast when adjusting the speed. It is strictly forbidden to turn the speed regulating handwheel when it is stopped. The speed regulating limit screw under the handwheel has been adjusted at the factory and should not be adjusted arbitrarily to avoid damaging the transmission parts. If the motor is replaced, attention should be paid to retaining the original motor flange with oil seal to prevent lubricating oil from flowing into the motor and continuously variable transmission. The lubricating oil replacement cycle for worm gear reducers (except maintenance-free) is after the first use. The lubricating oil should be completely replaced once. If the working condition is poor, the lubricating oil replacement cycle should be appropriately shortened. If there is a gear reduction part, the gear box should be used The medium speed reduction grease should also be replaced accordingly.
Product Features
The series of continuously variable transmissions have been used in practice for many years, proving that they have a unique style among many families of continuously variable transmissions. Due to the design structure of this series of products, they are easy to operate and have stable transmission. and other characteristics, so it is widely used in food machinery, printing, paper machinery, rubber, plastic machinery, ceramic machinery, pharmaceutical machinery and various work production lines that require variable process parameters and continuous changes in speed. It also has new products During the trial production process, the optimal working speed of the machine was explored.
The continuously variable transmission has high speed regulation accuracy and is the leader among similar products.
, Large height range and speed adjustment range
, All transmission parts of this series of transmissions have been strictly processed, precision processed, ground, and have good contact and lubrication properties, so they operate smoothly, have low noise, and have long service life.
The characteristic of the transmission is that it can be effectively used in combination with various gear reducers, cycloid reducers, worm gear reducers and reduction motors, thereby increasing the output torque and realizing various applications in different situations. Minimum and maximum output speed, with good adaptability.
The output torque and power of the transmission change with the change of the output revolutions, and have the mechanical characteristics of variable torque and variable power.
Continuously variable transmission model
Basic horizontal type, vertical type
One-stage gear
This series of reducers are equipped with a series of ordinary three-phase asynchronous motors as standard, and the motor adopts pure Copper motors, if you need frequency conversion, braking, explosion-proof, variable frequency braking, etc. motors, please contact us or make a note yourself.
Transmission range
Basic type/
Transmission with one-stage gear reduction/
Transmission with two-stage gear reduction/
Technical parameters
Input power. ~
Speed regulating range ~/
Allowable torque
The continuously variable transmission is suitable for operation in both forward and reverse directions, but it must not be used beyond the rated torque.
Continuously variable transmissions and worm gear reducers are only suitable for power transmission and cannot be self-locking.