Huazhou CNC woodworking band saw machine CNC jigsaw three-dimensional band saw machine

), fully automatic CNC
, what control is used?
Machine (computer) controlled motion processing
How thick of wood can be cut?
The thickness can be cut to about the thickest
How long and how wide can the wood be cut?
Conventional machines can cut the best wood
If there are special needs, special machines (machine dimensions) can be customized
How many layers of wood can be cut at one time?
As long as the total thickness does not exceed, several layers can be processed
What kind of saw blade is used for CNC band saw?
Ordinary band saw blades are enough. Of course, alloy saw blades can also be used, but the cost is slightly higher (an alloy saw blade costs about 1 yuan).
What is the machine power rate?
The power rate is about kilowatts
Are the accessories imported?
Some accessories are made in Taiwan, such as guide rails, linear bearings, balls, screw rods, and some electronic control components.
How big is the machine?
What is the length, width and height of conventional machines?
Which products are they mainly used for processing?
Mainly used for cutting curved rough wood, such as sofas, chairs, bedsides and various solid wood furniture
Is it easy to use? Is programming troublesome?
It’s definitely easy to use
Programming is relatively easy. We have dedicated technical staff to teach customers how to program and use the machine.
How long is the warranty?
The whole machine has a one-year warranty, and repairs are guaranteed at any time as long as it is not caused by human factors. Consumable parts such as saw blades, bearings, etc. are not included. (Extended warranty can also be granted if the customer requires it)
Does the machine have an automatic refueling machine?
Yes. Fully automatic oil injection machine.
How efficient is the machine cutting?
Approximately, this question can only be said approximately. A CNC saw can handle the workload of an ordinary sawing machine.
In what aspects are CNC saws more efficient than ordinary saws and saving wood?
①CNC band saw saves labor and eliminates the process of drawing lines
②There is no need for skilled workers to operate the machine, you only need to find an ordinary worker or female worker to load and unload the material
③Can be used once Place multiple layers of planks for processing. For example, when processing chair legs, you can place the upper wooden board for processing. In other words, you can cut out a chair leg with just one saw. If you cut thin plates, you can put more plates and it will be more efficient
④Details about saving materials
Eliminating the error of manual line drawing. The cutting saw path is strictly controlled by the computer, so it has high accuracy and consistency. Therefore, the processing allowance can be reduced (material saving). For example, if you cut a wide piece of wood to make a chair back, one piece of board can save one back leg (except for special workpieces of course), which is a considerable saving. One leg is about RMB.
. Because the cut workpieces have high consistency, it is more convenient and less labor-intensive to process the panels
. During Lichuang processing, due to the small processing margin left, the safety factor is greatly improved, and Workers save more effort in operation.
How much wood is left after the CNC saw blade cuts the final board?
About millimeters
Is the sawing process done by rotating the saw machine or twisting the saw blade?
Ours is a saw machine rotation. The advantage of the saw machine's rotation is stable cutting, and it is not easy to break the saw blade (breaking the saw blade is a big deal). The disadvantage is that it is larger in size. The advantage of twisting the saw blade is that the moving parts are not exposed and it is more beautiful. The disadvantage is that the broken saw blade is more serious. It is conceivable that repeated twisting of the saw blade at positive and negative degrees will cause the saw blade to break due to the characteristics of metal fatigue, which will reduce the processing efficiency and increase the cost of wearing parts (it is recommended that customers use the saw machine rotation method to prevent the saw blade from twisting. The first-generation product has too many shortcomings, because this method has been produced by well-known manufacturers, which has caused certain misunderstandings to customers. Technically, it is not an advisable method in any case)
Is the machine stepper or servo? of?
It is fully servo and is the best compensated servo motor in China. Some manufacturers use stepper motor transmission. Although the cost is low, it is extremely unreasonable, prone to errors, broken bars, and low efficiency (where is the stepper motor? It was widely used in CNC machines in 2008. Now it has disappeared from the Japanese market, but it is still used in the domestic market, but there are too many shortcomings, so the application of servo motors is inevitable. Servo motors are the best used in CNC machine tools at this stage. , the most reasonable transmission motor.
For the benefit of customers, efficiency, reduction of our after-sales troubles, and improvement of reputation, we recommend customers to use servo motors as much as possible.