Year1
- 功率：
- 3-132kw
- 流量：
- 10-2200m3/h
- 扬程：
- 5-60m
Conditions for use of submersible slurry pump
. The power supply is or//three-phase AC power supply, and the capacity of the distribution transformer is times the rated capacity of the motor.
． The medium temperature shall not exceed ℃, the type shall not exceed ℃, and it does not contain flammable and explosive gases.
． The maximum weight concentration of solid particles in the medium is % for ash and slag.
． The diving depth of the unit is not greater than 1 meter, and the minimum diving depth is subject to submerging the motor.
． The working position of the unit in the medium is vertical, with the upper part suspended.
General application
.Transportation of tailings, slag and slurry in mineral processing plants.
.Removal of coal slag, coal slime and coal slurry.
.Transportation of fly ash, coal slime and coal slurry in power plants.
.Absorb various solid particles of emery sand, quartz sand and steel slag.
.Ore dressing, gold panning, and iron sand pumping.
. Mining tailings sand from tailings ponds for reuse, improving resource utilization, improving production efficiency, and saving production costs.
.Cleaning, transportation and discharge of ore, tailings, mortar, slag, etc. in tailing dams or mines.
Structural features
. The whole machine is a dry lower pump type. The motor adopts oil chamber sealing method and is equipped with a mechanical seal, which can effectively prevent high-pressure water and impurities from entering the inner cavity of the motor.
. In addition to the main impeller, there is also a stirring impeller, which can stir the sludge settled at the bottom of the water into a turbulent flow and then extract it.
. The impeller and stirring impeller and other flow-passing parts are made of high-hardness high-chromium cast steel, which is wear-resistant, corrosion-resistant, has strong sewage discharge capabilities, and can pass larger solid particles.
. The motor is submerged underwater and is not limited by the suction range. It has a high slag suction rate and more thorough desilting.
. The overall equipment is simplified, no auxiliary stirring device or injection device is needed, the operation is simple, and the total investment of the unit is reduced.
. The stirring impeller directly contacts the deposition surface, and the concentration is controlled by the depth of penetration. When the specific density of the medium is large, the concentration of the medium can be increased by installing auxiliary devices.
Technical parameters of submersible slurry pump
Power flow/
Lift speed/,/
Caliber temperature ℃ + ℃
Material within the particle wear-resistant alloy
< br/>Quality and after-sales
1. Quality and technical standards are manufactured in accordance with national standards/standards, and the quality assurance system is implemented in accordance with them.
2. Technical standards, conditions and deadlines for suppliers to be responsible for quality, and three quality guarantees.
3. During the warranty period, if the conveyed medium meets the requirements of the pump's flow-passing parts and can comply with the instructions for use, if the product is damaged or fails to work properly due to poor manufacturing, our factory will replace or repair the wearing parts free of charge. Not within this period.
4. The wearing parts are made of high wear-resistant alloy steel
5. Our factory ensures that we can provide customers with accessories at low prices for a long time.
6. For cooperative units, our factory provides complete after-sales service to customers.
7. You can return the goods if you are not satisfied
)
) Hourly hotline (WeChat)
WhatsApp
