Sediment Pump | Submersible Sand Pump Manufacturer

功率：

3-132kw

流量：

10-2200m3/h

扬程：

5-60m

Sand pump | Submersible sand pump manufacturer is equipped with a stirring impeller at the bottom. Through strong stirring, the bottom sediment can be stirred into a slurry and pumped at the same time. It can be widely used in mining, electric power, metallurgy, coal, environmental protection and other industries to transport slurry containing abrasive solid particles. Such as gold mine panning, gold metallurgical ore dressing plant slurry transportation, thermal power plant hydraulic ash removal and coal washing plant coal slurry and heavy medium transportation, dredging rivers, river sand pumping and dredging, etc.

Conditions of use
The power supply is a three-phase AC power supply, and the capacity of the distribution transformer is times the rated capacity of the motor.
The working position of the unit in the medium is vertical, and the working state is continuous.
The diving depth of the crew shall not be greater than 1 meter.
The maximum weight concentration of solid particles in the medium is silt and slag.
The medium temperature shall not exceed ℃. The R-type high temperature resistance shall not exceed ℃ and does not contain flammable and explosive gases.
Scope of application
Absorb yellow sand from the bottom of rivers, lakes and seas.
Absorb silt and sand from the bottom of rivers, lakes, seawater reservoirs, fish ponds, etc.
Absorb powder slurry from various stone processing plants.
Tailings transportation, various tailings ore slurry, coal slurry, slag and slag treatment, etc.
Suction various solid slurry items processed by various water slurry operations.
Absorb the mud from the caisson well.
Sedimentation tank hydropower station reservoir river steel plant power plant caisson mine fish pond sediment cleaning.
Absorb various power plant fly ash and coal slime.
Absorb various solid particles of emery, quartz sand, steel slag and cinder.
Transport media such as sediment, slurry, coal slurry, sand and gravel containing larger solid particles.
Panning for gold sand and pumping out iron sand.

Technical parameters
Power flow, head speed r/r Caliber temperature ℃ + ℃
Material within the particle wear-resistant alloy

Structural composition
It is mainly composed of motor pump body, impeller guard plate, pump cover and bearing components.
The material of the pump body impeller guard plate is made of high chromium alloy wear-resistant material.
The shaft seal of the pump uses three sets of carbide mechanical seals, which better ensures the normal operation of the pump.

Quality and after-sales
1. Quality and technical standards are manufactured in accordance with national standards/standards, and the quality assurance system is implemented in accordance with them.
2. Technical Standards The supplier shall implement three guarantees regarding the conditions and deadlines for quality responsibility.
3. During the warranty period, if the conveying medium meets the requirements of the pump's flow-passing parts and can comply with the instructions for use, if the product is damaged or fails to work properly due to poor manufacturing, our factory will replace or repair it free of charge, and the wearing parts will not be this period.
Four wearing parts are made of high wear-resistant alloy steel
Fifth factory ensures long-term supply of parts to customers at low prices.
Sixth, for cooperative units, our factory provides complete after-sales service to customers.
You can return it if you are not satisfied
Hourly hotline WeChat