Hydraulic mixing sediment pump | Excavator wear-resistant slurry pump

功率：

3-132kw

流量：

10-2200m3/h

扬程：

5-60m

>Hydraulic mixing sediment pump, excavator wear-resistant slurry pump, hydraulic dredging pump, hydraulic mud pump, hydraulic pump is another newly developed product of our company. It is mainly used as an accessory device of the excavator, in mud, water In many cases that are not conducive to excavation, the grab can be replaced and the excavator's own hydraulic system can be used to drive the water pump to extract granular fluids such as sand, sludge, and mortar. In addition, it can also be equipped with a separate hydraulic station
>
>
Its flow-passing parts are made of high-strength and wear-resistant alloy materials, which have good wear resistance and large flow channels, and are suitable for Transport media containing large solid particles such as sediment, slurry, coal slurry, sand and gravel. In addition, adding a set of stirring impellers at the bottom of the pump can spray the deposited sludge into turbulent flow, and the water pump can realize high-concentration transportation without auxiliary devices.
>
>
>Main uses of hydraulic agitating sediment pumps
> Ports, rivers, lakes, etc. for sand pumping, desilting, dredging, and removing mud and sand, etc.
> , Extraction of mud, sand, gravel, etc., sea reclamation and port construction projects
>, iron ore, tailings ponds, mineral processing plants and other mine slag discharge, slurry discharge and all solutions containing solid matter
>, in metallurgy, It is used in steel and other industries to absorb high-concentration tailings, waste slag, high-temperature iron slag, iron filings, etc., pump sand, and pan for gold.
> It can be used in shallow water areas and swamps, and can be used in river dredging, lake development, wetland park construction, coastal beach development, salt lake development, tailings mine management and other water conservancy projects and swamp development projects.
>
>
Selection of hydraulic pump
> According to the actual situation, determine the required lift, flow rate, conveying distance, etc.
> Check the excavator parameters , clarify the displacement, pressure and other parameters of the excavator hydraulic system
>, then select the hydraulic motor model
>, calculate the actual output power of the excavator hydraulic system, and select an appropriate pump.
>Main Features
>The bottom of the pump is equipped with a stirring device, and can be equipped with independent agitators on both sides or on multiple sides, which can prevent large solid materials from clogging the pump and fully mix the solid and liquid. Easier to handle.
>. This pump can handle solid matter with a maximum particle size of 0.0, and the solid-liquid extraction concentration can reach above
>Note: Due to different working conditions, the output of the pump may also vary depending on the medium being processed and on-site operation. , and changes due to the influence of factors such as conveying distance.
> This device is mainly installed on the excavator. The power is provided by the hydraulic station of the excavator, which can realize free transition. The power source is a diesel engine, which can solve the problem of power inconvenience during construction in remote areas.
>Current parts: pump casing, impeller, guard plate and stirring impeller are all made of high chromium alloy. Other materials can be customized.
>. Adopt a unique sealing device to avoid frequent replacement of mechanical seals and improve work efficiency.
>Advantages of hydraulic transmission Compared with mechanical transmission and electric transmission, hydraulic transmission has the following advantages
>It is easy to achieve stepless speed regulation.
>, transfer dynamic balance.
>, large carrying capacity.
>The components have long service life.
>, easy to realize automation.
>Easy to implement overload protection.
>, easy to achieve standardization, serialization and generalization.
>, small size, light weight and compact structure.
>


>Quality and after-sales
>1. Quality and technical standards are manufactured in accordance with national standards/standards, and the quality assurance system is implemented in accordance with them.
>2. Technical standards, conditions and deadlines for suppliers to be responsible for quality: Three guarantees are implemented for quality.
>3. During the warranty period, under the condition that the conveying medium meets the requirements of the pump's flow-passing parts and can comply with the instructions for use, if the product is damaged or fails to work properly due to poor manufacturing, our factory will replace or repair it free of charge. If the product is easily damaged, The items are not within this deadline.
>4. Consumable parts are made of high wear-resistant alloy steel
>5. Our factory ensures that we can provide customers with accessories at low prices for a long time.
>6. For cooperative units, our factory provides complete after-sales service to customers.
>7. Returns if not satisfied
>Hourly hotline: (WeChat):
Hydraulic wear-resistant sand suction pump