Year1
- 功率：
- 3-132kw
- 流量：
- 10-2200m3/h
- 扬程：
- 5-60m
The heat-resistant sand pump is suitable for working conditions
. Cleaning the coal slag, slag or ash after coal combustion in the coal sedimentation tank of power plants. emissions.
.Water and slag transportation in blast furnaces of steel plants.
.Cleaning up oxide scale deposits in steel plants.
.Absorb various power plant fly ash and coal slime.
.Discharge and transportation of high-temperature smelting waste residue in smelting plants.
.Cleaning of turbid circulating water systems and cyclone sedimentation tank oxide scale sediments in hot steel rolling plants.
.Cleaning of high-temperature impurities in the grit settling tank of a heating company.
Structural features
The overall equipment is simple and does not need to be equipped with auxiliary stirring device or injection device. It is easy to operate and the total investment of the unit is reduced.
The flow-passing components such as the impeller and stirring impeller are made of high-hardness, high-chromium cast steel, which is wear-resistant, corrosion-resistant, has strong sewage discharge capabilities, and can absorb larger particles.
, wide flow channel, good anti-clogging performance and superior cavitation performance.
The flow-passing parts are made of special materials with good wear and corrosion resistance. After special treatment, they are used for seawater dust removal and seawater and salt spray electrochemical corrosion conditions.
The seal of the pump adopts carbide mechanical seal.
The rotation direction of the pump is counterclockwise when viewed from the direction of the impeller inlet.
Conditions of use
The power supply is, /, three-phase AC power supply, and the capacity of the distribution transformer is times the rated capacity of the motor.
The working position of the unit in the medium is vertical, and the working status is continuous.
The diving depth of the crew shall not exceed meters.
The maximum weight concentration of solid particles in the medium is ash and slag, and slag is %.
The medium temperature shall not exceed ℃, the type (high temperature resistance) shall not exceed ℃, and it does not contain flammable and explosive gases.
Technical parameters of heat-resistant sand pump
Power flow/
Lift speed/,/
Caliber temperature ℃ + ℃
Material within the particle wear-resistant alloy
Quality and after-sales
1. Quality and technical standards are manufactured in accordance with national standards/standards, and the quality assurance system is implemented in accordance with them.
2. Technical standards, conditions and deadlines for suppliers to be responsible for quality, and three quality guarantees.
3. During the warranty period, if the conveyed medium meets the requirements of the pump's flow-passing parts and can comply with the instructions for use, if the product is damaged or fails to work properly due to poor manufacturing, our factory will replace or repair the wearing parts free of charge. Not within this period.
4. The wearing parts are made of high wear-resistant alloy steel
5. Our factory ensures that we can provide customers with accessories at low prices for a long time.
6. For cooperative units, our factory provides complete after-sales service to customers.
7. You can return the goods if you are not satisfied
) Hourly hotline (WeChat)
WhatsApp
