Year1
- 型号：
- LLG-100*4-10
- 长度(m)：
- 6.8
- 重量(kg/m)：
- 7
_ Pole erecting machine_meter pole_iron pole_unicorn pole high quality and low price Our factory supplies pole erecting machine mainly used in rural power grid transformation pole machine
Stand up - meter power cement pole For tower use. Pole erecting machines are roughly divided into three types: aluminum alloy tripod pole erecting machines and herringbone pole lattice structure aluminum alloy herringbone poles. Pole erecting machine
The aluminum alloy tripod pole erecting machine with the largest amount of lifting capacity is flexible and convenient to use. The pole erecting machine is simple and easy to operate. Three people can complete the erection of the cement pole. The tripod pole erecting machine is composed of three aluminum alloy tubes and a two-speed manual gearbox. It has high construction safety and efficiency and can erect cement poles within hours
It solves the problem of mountainous alleys and hilly areas where cranes are not easy to operate and facilitates transportation.
Pole erecting machine
Application: Aluminum alloy pole erecting machine is suitable for vertical pole lifting of lower shaft cables, steel strands and other goods.
Features: The main material is made of the highest strength aluminum alloy, which is reliable and safe. Pole erection machine
This pole erection machine lifting tool does not require ground anchors and has a high safety factor. Three people can complete the assembly of the tool and the pole erection machine
With the two-speed hand-operated winch, the lifting can be easily completed. heavy duty. This product is small in size, light in weight, flexible in application, and has a high insurance factor. It solves the problem that cranes cannot carry out the site and manual pole erection is very dangerous.
Construction in urban alleys or mid-level hilly areas can better reflect its characteristics. The complete set of poles The process only takes a few people to complete in just ten minutes.
Vertical pole machine
Features of the grinding mill: It adopts new fast and slow two-speed hand-operated grinding grinding, which is easy to operate and has a long service life. The maximum output force is combined with the double pulley group, and a single person can complete the vertical pole work by shaking and grinding.
The aluminum alloy pole erecting machine adopts high-grade raw materials produced by Tianjin Aluminum Alloy Factory. After many years of development and research by the factory's technical staff, it is now officially put on the market. The aluminum alloy pole erecting machine is small in size, light in weight, flexible and convenient in application. The high insurance factor solves the problem of cranes. Unable to carry out the site and the dangerous problem of artificial pole erection (construction in hilly areas in the mid-level mountains) further reflects its characteristics. The entire pole erection process only needs a few people to complete it in a short period of ten minutes.
Pole erecting machine
Meter pole erecting machine operating procedures:
, support the aluminum alloy tree pole (the angle can be determined according to the construction site)
, hand-cranked and stable. Place it at a distance of more than one meter from the pit (note: the stabilizer, telephone pole, and pit must be on a horizontal line for the best pole angle!)
It is best to use ground anchors to stabilize the stabilizer on the pole. Check all parts beforehand
. When placing the poles, pay attention: the thick end of the pole is directly facing the pit and the bottom of the thick end of the pole must be equipped with a pocket rope
. Use oil thread to cover the pole. The thin ends of the wire rods should be tied with ropes on both sides.
After checking all parts, you can shake the large stabilizer to slowly erect the pole.
Pole erecting machine
Aluminum alloy tripod pole erecting machine operating rules:
Set up the middle vertical point of the aluminum alloy tripod pole erecting machine to face the dug pole pit.
Use oil wire to wrap the wire pole around the wire pole. (meter telegraph pole). Meter (meter telegraph pole)
Manually shake the stabilizer handle to lift the thick end of the wire pole vertically downward. Put it into the pit after the ground.
The two auxiliary poles (meters) must be parallel to the main pole to form an isosceles triangle after being supported. The maximum support point of the two auxiliary poles cannot exceed .~m
Product name: Aluminum alloy tripod pole erecting machine
Specifications:
rModel
r length ()
r root opening ()
r allowable vertical load ()
r cross-sectional size ()
< br/>rWeight(/)
*
r.
r.
r
r&;
r
*
r.
r.
/>r
r&;
r.
*
r.
r.
r
r&;
r
*
r.< br/>
r.
r
r&;
r
*
r.
r.
r
r&;
r.
< br/>*
r.
r.
r
r&;
r
*
r.
r
r
r&;< br/>
r
*
r.
r
r
< br/>r&;
r.
*
r.
r
r
r&;
r
*
r.
r.
r
r&;
r
*
r
r
r
r&;
r.
*
r
r.
r
r&;
r
&;Pole erecting machine
Use: Used to erect small single poles in distribution line construction.
&;Description: The maximum output force of the hand-cranked grinding mill is;
.
Pole machine
The main material is high-strength aluminum alloy tube; the steel parts are galvanized;< br/> .Stable safety factor.
【Pole Stand】-Rice pole_wooden pole_aluminum alloy cash on delivery
The above is our company's product information. In addition, our company can also process and customize according to customer requirements. New and old customers are welcome to call for consultation
br/>Telephone pole machine tube metal pole_herringbone pole cash on delivery
WhatsApp
