< b ) br )< )
: <<<<< <
: <<<<<<
< : Traffic
: /
: /
: /
< : Lift
:
:
:
< : Peak power
:
: < br/> :
< : Valley power
:
:
:
< : Power supply
: > < br/>
< : Size
: >**
< : Inlet and outlet diameter
: >One inch thread
< b ) br )< )
< b ) br )< )
This controller has three modes. Each mode can be selected by pressing the buttons. The mode functions are as follows:
making the water still and making it easier for fish to eat. The digital tube displays the start of the minute countdown and the end of the minute countdown. After a few minutes, the wave pump automatically starts working in the pre-feeding mode. If you need to return to work during the feeding process, press the button to return to the pre-feeding mode.
< b ) br )< )
When installing the control box, pay attention to waterproofing to prevent water from splashing into the control box. on
Non-professionals please do not open the control box and adapter casually to avoid damage< b ) br )< )
Install the filter cover and adapter on the water inlet and outlet of the pump body respectively
Remove the protective paper from the double-sided tape and stick it closely to the back of the intelligent controller In the middle position, remove the protective paper on the other side of the double-sided tape and stick the controller to the edge of the fish tank for easy operation. If you do not need to install it on the fish tank, you can omit this step
Connect the needle quick connection cable between the pump body and the controller, then connect the adapter plug to the controller, and connect the adapter cable. < b ) br )< )
If there is water on the surface of the control box, please wipe it with a dry cloth to prevent water from entering the control box
When the water pump does not rotate, first check whether the control box is powered on, then remove the water pump base, unscrew the front cover, and check that there are impurities in the wall of the water pump.
Wipe the blades with a soft cloth and clean the pump body with water
This product is suitable for indoor use, but it is strictly forbidden to drop the control box and adapter into the water to avoid unnecessary losses.
Regular inspections will increase the life of your water pump. < b ) br )< )