Year1
< br ) < br < b The water pump has five modes, which are: fixed flow mode (gear), flow and wave mode (gear), classic wave mode (gear), feeding mode, night mode, the waveform can be adjusted at will, the maximum power can reach, the maximum water volume/, power Multi-level adjustment makes it suitable for fish tanks of various sizes
< br < bAdopts the most advanced three-phase brushless frequency conversion intelligent control technology, soft start without impact, and changes the speed of the water pump by adjusting the duty cycle and Power
< br < bLow-voltage DC frequency conversion is safe and reliable, with high efficiency, large flow and low noise.
< br < bCeramic shaft core and carbon fiber sleeve ensure the long service life of the water pump
< br < bSimple operation panel to realize complex dynamic seawater functions
< br < bFlow of water The direction can be adjusted according to the angle as needed
< br < bThe water pump works at DC low voltage, which is safe, reliable, high efficiency and small in size
< br < bThe water pump power adapter has a wide voltage input (~ /), which can be suitable A variety of power grids, and can avoid the impact of voltage fluctuations on wave making
< br < bEasy installation and maintenance, suction cup base or magnetic shock absorption base (the position of the pump can be moved outside the fish tank)
< br < bMultiple current and wave making modes can achieve different water waves.
< br < bApplicable to fresh water and seawater
< rr br< b.
< br br ) br )< br )
br br : flow
br : /
br : /
br : /
br : /
br br : Peak power
br :
br :
br :
br :
br br : Valley power
br :
br :
br :
br :
br br : Power supply
br :
br br : Dimensions
br : **
br br : Outlet diameter
br :
br br: Base
br: Magnetic base/suction cup base
< br br ) br )
< ): This controller has three modes. Each mode can be selected through the keys. The mode functions are as follows:
< ) :
< ) :
< ): This mode can change the effect of the fixed program through the keys. There are a total of gears, which can be adjusted according to the needs of the creatures in the water.
< ) :
< ): making the water still and making it easier for fish to eat. The digital tube shows the start of the minute countdown, and the display of the minute countdown
< ): the end of the countdown. After a few minutes, the wave pump will automatically start working in the pre-feeding mode. If you need to return to work during the feeding process,
< ): Press the button to return to the pre-feeding mode.
< br br ) br )< br )< br
< br ) < br Basically suitable for all fish tank sizes, the thickness of the fish tank is preferably less than< br The product components in the package include: wave pump intelligent controller adapter adapter Double-sided tape for wires< br Remove the rear magnetic suction cup from the wave pump body bracket, and install the pump body in the middle of the inner wall of the fish tank. Use the rubber suction cup to tightly suck the inner wall of the cylinder. Then move the rear magnetic chuck diagonally to the outer wall of the cylinder. Due to the strong magnetic attraction, be careful to pinch your hands< br Take off the protective paper of the double-sided tape and stick it to the middle of the back of the smart controller. Then remove the protective paper on the other side of the double-sided tape and stick the controller to the edge of the fish tank. , easy to operate. If you do not need to install it on the fish tank, you can omit this step< br Connect the needle quick connection cable between the pump body and the controller, then connect the adapter plug to the controller, and connect the adapter cable. < br br ) br )
< br br ) br )
< br br ) br )< br )< br
< b br br ) />
WhatsApp
