调试平流溶气气浮机时注意事项:
1、加水:气浮池中加满清水。气浮池水位的高低可用溢流堰上的调节装置进行调节。
2、溶气系统试运行:关闭溶气水出水阀。将加气电磁阀接通电源,启动工作水泵,启动空压机,然后打开工作泵控制阀。压力表的压力逐渐上升,一直达到泵所能达到的压力(压力表的压力达到3-5kg/cm2),此时打开水溶气出水阀。溶气水通过出水阀进入释放器,释放到气浮池。池水中出现大量微气泡是清水边乳白色,即可认定溶气系统正常。溶气水的压力可看溶气罐上的压力表读数,该压力的大小可用控制阀启动的大小来控制,在水泵可供压力范围内调整,一般取3.5-5kg/cm2.压力越高。
山东金双联环保设备有限公司主要生产经营超效浅层气浮机,浮沉淀一体机,平流溶气气浮机等气浮设备。
Disclaimer
The information/pictures/parameters, etc. displayed on this webpage about【Precautions for debugging of advection dissolved air flotation machine】are provided by member【Jinshuanglian Environmental Protection Equipment Co., Ltd.
】,By Titker Trade Network members 【Jinshuanglian Environmental Protection Equipment Co., Ltd.
】is solely responsible for the authenticity, accuracy and legality of the information/pictures/parameters, etc.,Titker Trade Network only provides display services. For your safety, please choose Titker Trade Network for online trading, otherwise Titker Trade Network will not bear any responsibility for this.
If your legitimate rights and interests have been infringed, please contact Titker Trade Network customer service as soon as possible. We will serve you wholeheartedly. Thank you for your attention and support to Titker Trade Network!