Year1
- 规格：
- 1.3*2.8
- 密度：
- 120公斤
- 硬度：
- 55
Specifications: ..*.. Density: Repeated tests by the Ministry of Transport, the Academy of Sciences and other units have proven that its performance can be compared with wood, cork, rubber, asphalt, polyethylene Ethylene closed-cell foam boards have been widely used in concrete joints and expansion joints in highways, railways, bridges, buildings and other concrete projects abroad, and are also used in domestic hydropower projects. . In the construction of hydraulic expansion joints, closed-cell foam boards are used to replace the traditional three-oil-four-felt, asphalt wood, fir boards and other materials, and the tops are filled and sealed with polysulfide sealant. The combination of closed-cell foam board and polysulfide sealant applies this new construction technology, which breaks many limitations of the construction of asphalt shank expansion joints. The construction is convenient, fast, and low in construction cost. In addition, the polysulfide sealant has the advantages of traditional petroleum asphalt. The hydrophobicity, enhanced Jiwan Borneo Scholarship and its water resistance and aging resistance, classification of polyethylene closed-cell foam board. Polyethylene closed-cell foam board is divided into two types, high-foaming foam board and low-foaming foam board. Among them, the medium type is suitable for making cement joint filling boards for ordinary ditches and pools, and the medium type is suitable for making cement joint filling boards for reservoir dams because of its hardness. & Relatively hard, this product is pure black and is generally used in water conservancy projects, water plants, power plants and other physical properties. It has high density, high recovery rate and independent bubble structure. The water-absorbent surface has low water absorption and good anti-penetration properties. Chemical properties: pH, acid, alkali, salt, oil and other organic solvent corrosion resistance, excellent aging resistance. Stability: No flow at high temperatures and no brittleness at low temperatures. Application scope of concrete basic properties: expansion joints of soil highways, slabs, bridges, joints, water conservancy projects, dams, dam protections, stilling sills, slope protection, barrier walls, expansion joints of hydropower, thermal power, engineering, bottom of water towers Water-stop joint board for building settlement joints and frame structure caulking boards. Domestic water plants and sewage treatment plants. Pool water-stop caulking boards. Physical and mechanical properties. Apparent density.&./ Tensile strength&.& Compressive strength.& Tear strength&./ Heating deformation&.%& Water absorption&./㎝& Elongation&%& Hardness (C type hardness tester) Shore. Degree of compression deformation&.% The closed-cell foam board is made of high-pressure polyethylene low-foaming closed-cell foam board, and the material properties will not change when interacting with the sealant.
Joint plates for airport runways, ports, docks, concrete joint plates for water tunnels, tunnel concrete water joint plates for subways, and concrete water-stop joint plates for underground passages. Because chemically cross-linked polyethylene foaming has its unique advantages, such as strong recovery rate, non-water absorption, impact resistance, weather resistance, chemical resistance, and aging resistance that other materials do not have, foaming The fields of application are becoming more and more extensive. Other products sold by our company: polyethylene closed-cell foam board, rubber waterstop, water-swellable waterstop, two-component polysulfide sealant, rubber bearing, one-component polyurethane sealant, two-component polyurethane seal paste, water-swellable water-stop glue, bridge expansion joints, geotextiles, polyvinyl chloride cement and other waterproof products.
& Hengshui Guangfeng Engineering Rubber & Plastic Co., Ltd. was established in The polyethylene closed-cell foam board manufacturer is a modern enterprise that is very advanced. The polyethylene closed-cell foam board manufacturer is not easy to absorb water. If the humidity of the polyethylene closed-cell foam board manufacturer is too high, it will affect the thermal and mechanical properties of the material. The low water absorption of the polyethylene closed-cell foam board manufacturer will help maintain these properties. Polyethylene closed-cell foam board manufacturers are not only environmentally friendly but also recyclable. Polyethylene closed-cell foam board manufacturers are recognized by many manufacturers and users in the industry. I believe that we will rely on our company's profound skills and honest business methods to bring high-quality polyethylene closed-cell foam board manufacturers to our users.
WhatsApp
