QBY type-stainless steel pneumatic diaphragm pump product features, model meaning, product overview

stainless steel pneumatic diaphragm pump product features:
B stainless steel pneumatic diaphragm pump is a volumetric pump whose volume changes due to reciprocating deformation of the diaphragm. Its working principle is similar to that of a plunger pump. Due to the characteristics of the working principle of pneumatic diaphragm pumps, Therefore, the pneumatic diaphragm pump has the following characteristics:
The pump will not overheat: compressed air is used as power, and it is a process of expansion and heat absorption when exhausting. When the pneumatic pump is working, the temperature is reduced and no harmful gas is discharged.
No sparks will be generated: the pneumatic diaphragm pump does not use electricity for power, and it prevents static sparks after being grounded
Can pass liquids containing particles: because it works in a positive displacement manner and the inlet is a ball valve, it is not easily blocked.
The shear force on the material is extremely low: it is sucked in and spit out during operation, so the agitation of the material is minimal. It is suitable for the transportation of unstable substances and the flow rate can be adjusted. A throttle valve can be installed at the material outlet. to regulate flow.
Has the function of self-priming.
Can be run dry without danger.
Can work diving.
The fluids that can be transported are extremely wide, from low viscosity to high viscosity, from corrosive to viscous.
No complex control system, no cables, fuses, etc.
Small size, light weight, easy to move.
No lubrication is required, so maintenance is easy and the working environment will not be polluted by dripping.
The pump can always maintain high efficiency and will not be reduced due to wear.
One hundred percent energy utilization. When the outlet is closed, the pump automatically stops and the equipment moves, wears, overloads, and heats up.
With no moving seal, maintenance is easy and leakage is avoided. No dead spots when working.