Bosite refractory gold ore beneficiation method, gold beneficiation and smelting technology, cyanide gold tailings recovery and reuse

Bosite refractory gold ore beneficiation method, gold beneficiation and smelting technology, cyanide gold tailings recovery and reuse
Application of gold-containing ore gravity separation method
In gold concentrators, gravity separation is mainly used to extract from Separate coarse-grained and fine-grained single gold, gold-containing sulfides, tellurides and "coated gold" that cannot be fully recovered by other methods from the ore. In addition to the size of the gold particles, the shape and structure of the gold particles also have an impact on the gravity selection effect. Generally, equiaxed particles and homogeneous particles with larger specific surface areas are easier to sort and collect. Before flotation and cyanidation, gravity separation can be used to obtain waste tailings with relatively stable gold content and high-grade gold concentrate.
In the grinding circuit, jigs, shakers and hydraulic traps are commonly used to select monomer gold in advance to achieve the purpose of early recovery, which is very beneficial to improve the recent recovery rate. Before leaching or flotation, gold particles can only be selected by gravity selection. In production, jig, shaker and other gravity selection equipment can be used for selection (+gold should be selected before leaching). For example, a company in South Africa installed a shaking table in the first grinding circuit to recover coarse gold. Others pass the jig concentrate through an automatic gold pan to select gold. The jigs, shakers and belt-covered chutes used before flotation in my country's gold processing plants have all achieved good results.
my country's centrifugal separator is still in the experimental stage, but it has made certain progress. It may be used to process finer particle sizes and parts with smaller specific gravity differences than conventional gravity separation equipment. The model centrifugal concentrator is designed to continuously discharge concentrate and tailings, but the feed must be carefully pre-classified. Intermittent centrifugal concentrators have been used to recover fine-grained gold in placer gold beneficiation.
For the recovery of fine-grained gold, the South African gold concentrator uses an inclined plane elimination plate, and also uses a mercury chute or a spreading chute. In modern large-scale processing plants, it is not appropriate to use equipment with small processing capacity, high labor intensity and low efficiency.
Henan Bosite Machinery Manufacturing Co., Ltd. specializes in the production of jigs, mercury amalgamation cylinders and other gold ore beneficiation equipment as well as gold ore gravity separation equipment, and can conduct small gold beneficiation tests for customers free of charge. Customers are welcome to our factory Visit guidance and purchase equipment!