Year1
- 电压：
- 50V
- 容量：
- 47NF
- 尺寸：
- 3.2*1.6
, High frequency coupling: ceramic capacitors, mica capacitors , polystyrene capacitors
, low coupling: paper capacitors, ceramic capacitors, aluminum electrolytic capacitors, polyester capacitors, solid tantalum capacitors
, small capacitors: metallized paper capacitors, ceramic capacitors Contact Ouyang - available Get Free Sample Shipping Service Welcome your caller capacitors, aluminum electrolytic capacitors, polystyrene capacitors, solid tantalum capacitors, glass glaze capacitors, metallized polyester capacitors, polypropylene capacitors, mica capacitors at any time.
?
The naming method of electronic capacitors is related to the selection. Ouyang Free Samples
The width of the part cannot be greater than. A pair of pointed tweezers can be used to move and hold chips and examine circuits. Also prepare fine welding wire, flux, isopropyl alcohol, etc. The main purpose of using flux is to increase the fluidity of the solder so that the solder can be pulled by the soldering iron and smoothly wrapped around the pins and pads relying on surface tension. Use alcohol to remove the flux from the board after soldering. Contact Ouyang - you can get free sample sending service and welcome your calls at any time
??? 2. Welding method
??? First apply flux on the pad and then treat it with a soldering iron to avoid poor soldering due to poor tin plating or oxidation of the pad. Chips can usually be welded without treatment.
??? ． Use tweezers to carefully place the chip onto the board, being careful not to damage the pins. Align it with the pad to ensure that the chip is placed in the correct direction. Adjust the temperature of the soldering iron to about Celsius and apply a small amount of solder to the tip of the soldering iron. Use a tool to press down on the aligned chip. Add a small amount of flux to the two diagonal pins and still press down on the chip to solder the two < br/>
WhatsApp
