Special chip capacitor for soy milk machine 250V 155 X7R 1812 package

电压：

250V

容量：

1.5UF

尺寸：

4.6*3.2

High frequency coupling: ceramic capacitors, mica capacitors, polystyrene capacitors, low coupling: paper capacitors, ceramic capacitors, aluminum electrolytic capacitors, polyester capacitors, solid tantalum capacitors
, small capacitors: metallized paper capacitors, Contact Ouyang for ceramic capacitors: Free sample delivery service is available. Your callers, aluminum electrolytic capacitors, polystyrene capacitors, solid tantalum capacitors, glass glaze capacitors, metallized polyester capacitors, polypropylene capacitors, and mica capacitors are always welcome.
?
The naming method of electronic capacitors is related to the selection. Ouyang Free Samples
The width of the part cannot be greater than. A pair of pointed tweezers can be used to move and hold chips and examine circuits. Also prepare fine welding wire, flux, isopropyl alcohol, etc. The main purpose of using flux is to increase the fluidity of the solder, so that the solder can be pulled by the soldering iron and smoothly wrapped around the pins and pads relying on surface tension. Use alcohol to remove the flux from the board after soldering. Contact Ouyang: ： Free sample delivery service is available, your calls are always welcome
??? 2. Soldering method
??? First apply flux on the soldering pad, and then use a soldering iron to handle it to avoid The solder pad is poorly tinned or oxidized, resulting in poor welding. The chip can usually be welded without treatment.
??? Use tweezers to carefully place the chip on the CB board, being careful not to damage it