Laser processing smoke purifier smoke purifier dust collector industrial waste gas treatment

产品尺寸：

450×520×1020mm

最大风量：

480m3/h

净化除尘率：

99%

& Special equipment for laser processing smoke and exhaust gas treatment

R
Fume purifier
1. Purifier function:
This purifier is specially used for laser marking, engraving, Designed to purify fumes generated by cutting, welding, etc.
The purifier uses imported high-pressure, low-noise fans, which can effectively absorb smoke particles and maximize the service life of the filter element. Its control system adopts speed regulation, which can realize continuous and precise adjustment of air volume according to the amount of smoke generated. The control system is designed with an indicator light alarm device. When the filter element is clogged, the red indicator light will light up to prompt to replace the filter element.
The filtration system consists of three parts: a pre-filter layer, a main filter layer and a gas filter layer. The pre-filter layer uses a dust filter bag, which can adsorb larger particles in the air flow to prevent the main filter layer from being blocked prematurely. The gas filter layer is composed of a high-efficiency filter element. The filter efficiency of the high-efficiency filter element for micron particles is .%. The gas filter layer is composed of a chemical filter element, which can effectively remove harmful gases in the air flow, remove smoke, dust and odor.
2.
Specification parameters
Model

= =://r/c_ No background color:=Picture__
Product Dimensions
&
Important

Maximum air volume
&/
Rated power

Power supply

Noise

Purification and dust removal rate
%
Pipe interface
&
Scope of application
c= Laser marking, inkjet coding, engraving, cutting Purification of smoke, dust, harmful substances including odor from processing plastics, rubber, acrylic, paper products, leather, etc. and various metals.

3. Product Features
&&Integrated body design, easy to install, equipped with casters, easy to move, no need to lay pipes
&&Adopt soft start, brushless fan, high pressure High speed, high efficiency, low noise, long service life
&&Speed adjustment, automatic detection and feedback of filter layer pressure difference intelligent control system, when the filter layer is clogged, an audible and visual alarm signal will be sent
&&Generated for laser processing The odor is eliminated, the filter element is precisely equipped, the multi-layer filtration design is used, and the graded purification can effectively purify smoke and dust, remove odor, meet indoor emission standards, and protect the environment and human health. The filter has modular design, layer-by-layer protection, easy replacement, and long service life
&&The indoor circulating air filtration method avoids discharging indoor cold air (or heating) to the outdoors, and can maintain the cleanliness of indoor air and save energy. cut costs.
Compared with R, R adopts an inverted design, with airflow flowing from bottom to top. The pre-filter layer is replaced with a special dust filter bag structure with a larger dust holding capacity, and a dust hopper is placed underneath. After the equipment stops working, part of the dust in the filter bag will settle into the dust hopper at the bottom and needs to be cleaned regularly. This equipment is suitable for occasions with a large amount of smoke. The filter bag is set upside down, which can extend the service life of the filter.
r.rb:.r c>For more information, please check the Ali store: =>r&,&&>?=....c
=,
r.rb:.r c>Or consult = ,
r.rb:.r c> Song style>Shenzhen Shenrui Industrial Co., Ltd.
= ,
r.rb:.r c> Song style>Contact: Song Juan
= ,
Mobile phone: = ,
r.rb:.r c>Phone: = ,
r.rb:.r c>Email: =>r&,&&>@r
= ,&&
： = ,
r.rb:.r c>Address: East District of Shangxue Science and Technology Industrial City, Bantian Street Office, Longgang District, Shenzhen City= ,
No.= ,
Building= ,
Floor= ,