Cement pre-vibration table Concrete vibrating table

耐磨：

100%耐磨

耐蚀：

100%耐蚀

耐用：

100%耐用

& Cement pre-vibration table concrete vibrating table. In order to extend the service life of the vibration platform, in addition to regular care and maintenance, what other matters should be paid attention to during daily use? Today we are here to talk to you about this issue.
The vibration platform should be installed on a solid foundation. The anchor bolts should be of sufficient strength and tightened. At the same time, an underground tunnel must be left in the middle of the foundation to facilitate frequent adjustment and maintenance

. Inspection and trial operation should be carried out before use to check whether the machine parts are intact. All fasteners, especially bearing seat bolts, eccentric block bolts, motor and gearbox bolts, etc.,
must be tightened reliable.
The vibrating platform should not be operated without load for a long time. During production operations, a strong and reliable formwork locking clamp must be installed to ensure that the formwork and concrete table vibrate together.
. The gears in the gear box are subject to high-speed and heavy loads, so they should be well lubricated and cooled. The oil level in the box should be maintained at the specified level, and the temperature rise should not exceed C during operation.
All vibration tables Bearings should be inspected frequently and regularly disassembled, cleaned and replaced with grease to ensure that the bearings are well lubricated. Pay attention to check the temperature rise of the bearings. If there is overheating, try to eliminate it immediately

The motor grounding should be good and reliable, and the power cord and wire connectors should be well insulated. There must be no damage or leakage.
The vibrating table surface should always be kept clean and flat to ensure good contact with the steel mold. Because the tabletop vibrates under high-frequency and heavy loads, it is easy to produce cracks, so it must be inspected and repaired in time
. It should be cleaned promptly after each shift.
The current domestic vibration platform market has entered a stage of rapid development. At the same time, more and more businesses are optimistic about this market with unlimited potential. Compared with other
testing equipment, the vibration table has stricter requirements for testing technology. However, currently, most of the products that are popular and trusted by users in the domestic market come from foreign companies, and our local
companies are always at a disadvantage. The main reason for this situation is that it is difficult for my country's existing vibration platform equipment to produce groundbreaking results.