Year1
- 功率：
- 90KW
& Environmental protection: The raw material is pure natural pine wood, which can be flushed directly into the toilet or used as fertilizer, and can be decomposed in the natural environment. No mineral soil, no ash, keep the room clean.
Easy to clean: This product is slippery after absorbing water, does not stick to feet or body, and is easy to rinse.
& Making this kind of cat litter also requires very high requirements for the wood pellet machine equipment, because since the cat litter is made from pure wood chips, no additives can be added, and the moisture content of the particles must be below a certain point. This characteristic requires that the pressure of the wood pellet machine must be large enough and the performance must be good.
&Yuguan wood pellet mill advantages:
1. Wood pellet mill structure. First of all, everyone must understand that the structure of wood pellet machine equipment is divided into vertical, horizontal and flat dies. Currently, it is the most professional and most professional. The mature structure is the vertical ring die. The vertical ring die is the most professional model used for biomass production in the wood pellet machine industry. The horizontal ring-die wood pellet machine was transformed from the equipment used to process feed pellets. It cannot press wood pellets very well. The flat die is professionally used to make cattle and sheep feed. It is better for straw and soft materials, but if it is pressed Some hard miscellaneous wood cannot be pressed out and is almost shapeless.
2. The structure of the wood pellet mill. Therefore, a vertical ring-die wood pellet mill is used to make biomass. The first is the structure of the vertical ring-die wood pellet machine: the main structure of the wood pellet mill: feed cover, The dial plate, granulation chamber, bearing chamber, and base are just the external structure. Of course, there are also many internal parts, such as molds, pressure rollers, spindles, etc.
3. Wood pellet machine material. A strong wood pellet machine manufacturer will use steel from major manufacturers, such as Baosteel, Jigang, Laigang, etc. Yuguan Machinery uses these three major steels. Factory material.
Fourth, heat treatment of wood pellet mills. High-quality wood pellet mills must undergo heat treatment, and there are many parts that require heat treatment, such as hollow shafts, molds, pressure rollers, briquettes, granulation chambers, etc. Bearing chamber, tightening bolts, spline shaft, eccentric shaft, etc. However, some informal or weak wood pellet machine manufacturers only have the main shaft and mold for heat treatment. After heat treatment, the parts not only have an increased service life, but also have a much stronger hardness and flexibility, which greatly increases the stability of the equipment. Therefore heat treatment is very critical.
& Features of Yuguan sawdust pellet mill:
, vertical ring mold, vertical feeding, effectively preventing the occurrence of material blockage.
The mold is stationary and the pressure wheel rotates to make the material evenly distributed and improve production efficiency.
, double-layer mold, one machine for two purposes, one set of mold can produce particles of two different specifications, effectively reducing costs.
Two sets of lubrication devices, the pressure wheel is automatically lubricated and the gear box is circulated to ensure smooth operation of the machine for a long time.
& Choosing good straw pellet machine equipment is half the success of your biomass project. Yuguan Machinery is not afraid that you will not buy it or that you will not come to see it. Yuguan Machinery’s straw pellet machine equipment is waiting for your inspection. .
WhatsApp
