Tablet price

For tablet computers, it has its own set of debugging methods, which are basically applicable to different types of tablet computers. After reasonable debugging, the equipment will be significantly improved compared to before. Not only the incidence of faults has been effectively reduced, but its production efficiency has also been greatly improved. Below are several commonly used debugging methods for tablet computers, which you can try to use as a reference.
First, turn on the power of the flatbed machine, but before that, make sure that the feeding direction of the flatbed machine is correct, then continue to run the flatbed machine, and rotate the speed adjustment screw of the feeder in a clockwise direction. The slider moves slightly slower so that the distance between the slider and the nylon gasket can be more clearly observed.
The distance from the flatbed machine to the feeder must also be appropriately adjusted based on factors such as the operating speed of the equipment and the length of the feed to ensure that the flattened material can smoothly enter the feeder and mold. If the feeding distance changes while the speed remains unchanged, you can first adjust the guide screw upward to reduce the descending distance of the floating rod, and then rotate the speed adjustment screw clockwise, so that it can match the operation of the entire flatbed machine.
This article comes from