Rust paint production imitation rust paint realistic effect high efficiency rusty iron paint price water-based environmental protection paint

&Product Category: Electroplating (silver) paint, metallic effect water-based paint series, imitation enamel paint, imitation glaze paint series, wood products and tea tray matching special paint series, flat glossy paint series
Color essence series, color paste series, pearlescent paste series, metallic pigments Series
Glitter powder series, pearlescent powder pigment series, gold powder series, varnish series, long-lasting luminous powder
Other categories: gold, silver, copper foil paper and various special series, antique oil, oil paint, turpentine, tinna Water, crystal glue, additive series, etc.
Rust lacquer series operation process
In view of the special nature of this product, the operation must be carried out in the following ways
and the required substrates should be treated accordingly , For example: Iron substrates need to be surface cleaned first to remove rust and oil stains. Other substrates (for example: wood, plastic, etc.) also need surface treatment before priming can be applied.
. Perform primer treatment on the treated substrate, and spray (or brush) it according to different materials. For example: iron substrate needs to be sprayed with corresponding varnish, and other materials that are best for baking paint also need to be sprayed. Corresponding base oil.
After the primer of the substrate is dry, brush or spray the rust paint on the surface (the preparation of rust paint is such as: main agent: curing agent B=:, it must be calculated strictly by weight and stirred thoroughly Apply evenly before painting the surface of the product substrate).
After completing the above work, leave it for an hour and the product will reflect the original color effect of rust. If the rust color is not enough due to weather or other reasons, the curing agent can be applied to the surface again by brushing alone or by spraying. After a few hours, the original rust color can be enhanced and the effect will be better.
If your company's products are outdoor products, it is best to spray a layer of outdoor sun-resistant matte (similar color to rust) varnish on the rust-colored surface, and carry out inspection on the rust-colored products. Protect.
&The above operation process is optimal when the working environment temperature is between ℃. If the temperature difference between the upper and lower temperatures is large, the corresponding formula of the product needs to be readjusted before operation.
small/>