Enping Kasler NFJ anti-spark and anti-static metal floor hardener

& Product Introduction: It is a factory ready-mixed powder that has undergone strict quality control and is convenient for on-site construction. It contains selected metallic mineral aggregate materials and specialty Portland cement, as well as special additives to promote construction properties. The specially formulated material ensures precise gradation and the absence of impurities. The aggregate displays good electrical conductivity and wear resistance.
Product Usage
Suitable for concrete surface layers that need to improve wear resistance and resistance, especially in anti-spark and anti-static areas. For example: flammable warehouses, chemical plants, petrochemical plants, hazardous chemical product workshops, gas stations, liquefied gas stations, arms and ammunition depots, aircraft hangars, textiles, electronics, papermaking, printing plants and other areas that generate static electricity for a long time.
Product advantages
. Make the ground extremely hard, resistant to wear and impact
. Form an integral bond with the concrete base surface
. Prevent sparks and conduct static electricity
. Resistant to corrosion by various oils and greases
. Easy to construct
Material properties
Wear resistance
The wear resistance of treated concrete floors is at least higher than that of untreated concrete floors. More than three times.
Electrical properties
Shows good electrical conductivity to dissipate static electricity. Upon specific requirements, it can be grounded according to traditional methods. Due to the concentration of ductile metal materials on the ground, they are highly resistant to sparks from metal impacts.
Surface resistance value~.&
Compressive strength
Using the same water consumption as in actual construction, the standard compressive strength of the test block was reached.
Storage
Store the product and curing agent in original packaging at room temperature and in a dry environment. The storage period is one month.
Hygiene and Safety
The cement powder contained in it will cause adverse effects on the skin during normal use. When the product is mixed and becomes damp, the alkali released will damage the skin and irritate the eyes and respiratory system. Avoid inhaling it. Powder, avoid skin and eye contact. Wear suitable gloves and eye protection.
In case of contact with skin, wash with clean water.
In case of contact with eyes, wash immediately with plenty of water and seek medical attention.
Basic properties of materials
Project bh:r
Performance indicators
Compressive strength (days) bh:r
&
Compressive strength (days) bh :r
&
Flexural strength (days) bh:r
&.
No fire bh:r
No fire, no explosion, no flammability
Fire protection grade bh:r
Grade
Wear resistance (/r) bh:r
&./㎝
Hardness (Mohs) bh:r
&
Surface strength (indentation diameter) bh:r
&.
Oil resistance bh:r
Oil penetration＜.
High temperature resistance bh:r
+℃
Frost-resistant type bh:r
℃ (no cracks or corner defects after freezing and thawing, strength loss rate &%)
Bonding strength (days) bh:r
&.
Anti-skid property (wet and dry friction coefficient) bh:r
&.
Air cleanliness bh:r
～Level
Green environmental protection bh:r
No harmful radioactivity, no harmful volatile matter, no pollution