Steel plant blast furnace gas sludge filter with high quality and favorable price

The sludge dehydrator is a machine newly developed by Luding Company that is specially used for industrial sludge dehydration. This equipment has an advanced structure and a high degree of automation, enabling continuous production every hour. The problem of effective sludge dewatering. It is also suitable for solid-liquid separation or liquid leaching processes in industrial production. It has a large processing capacity and is easy to operate and maintain. It has low energy consumption and low operating costs. The moisture content of the slag cake produced at low pressure is less than %
==Picture= d
<=_
==Picture= d
<=_
Scope of equipment application:
Widely used in chemical industry (dyes, pigments, caustic soda, soda ash, chlor-alkali salt mud, white carbon black, soap Vegetables, bleaching powder, lithopone, potassium, copper, water purifier, aluminum chloride, etc.), oil refining (white oil, sesame oil, light oil, vegetable oil, epoxidized soybean oil, etc.), pharmaceuticals (antibiotics, phytic acid Calcium, inositol, organophosphorus, glucoamylase, vitamins, etc.), sugar refining, metallurgy (gold, silver, copper, iron, zinc ore and other powder mineral processing), food (rice wine, juice, yeast, citric acid, plant protein, glucose , starch, corn syrup, MSG, bean paste, sauce, etc.), ceramics, and other industrial wastewater from the production process of various industrial industries (chemical wastewater, smelting wastewater, electroplating wastewater, leather wastewater, printing and dyeing wastewater, brewing wastewater, pharmaceutical wastewater, stone sewage) and domestic sewage purification treatment.
<=_
Equipment operation process
. Check and tighten the screws of each fastening part.
． Check the relevant horizontal, vertical and parallel conditions of the feed hopper, dewatering roller, guide roller and other components.
． Use wire ropes to go around the running routes of the upper, middle and lower filter belts to check whether there are any obstacles in their operation.
． Check the lubrication condition of each lubricating part and refill it with oil.
． Connect the motor wiring and other pipelines and check the motor rotation to see if the filter rotation direction is correct.
． Adjust the spray angle and water pressure of the flushing water pipe.
． Check the synchronization status of both sides of the filter belt, corrector and tensioner.
． Check the flexibility of all pneumatic components.
． Connect the filter belt along the running route of the filter belt.
． Thoroughly flush the upper and lower filter belts and related pipes.
． Start the air compressor, adjust the filter belt tension and turn on the flushing water after the air pressure is normal.
． Turn on the host power supply, slowly increase the motor speed, and observe the mechanical operation to ensure that there are no abnormalities before increasing the vehicle speed to the normal operating speed.
． After the machine is running normally, open the feed valve and observe the discharging situation to control the slurry thickness - the discharging concentration is above %
. When shutting down, first close the slurry gate and dosing device to stop feeding and dosing.
． The machine continues to run until the filter belt is rinsed clean and then the main motor is turned off.
． Turn off the air compressor
==---- = d
== = d

==Beer residue dehydration effect diagram= d
Ceramic sludge dehydration:
== Ceramic sludge dehydration renderings = d
Welcome to buy Luding high-pressure sludge dehydrator! The company has a professional equipment R&D and manufacturing base equipped with relatively advanced manufacturing and processing equipment, testing equipment, and experiments equipment. Strict management, excellence, and comprehensive services provide users with high-quality products and satisfactory services. Contact number:-