HQ-600 corrosive gas comprehensive box has stable performance

The equipment can reach any temperature point from ℃ to ℃ in the test working space and maintain it constant. Corrosion tests are conducted on materials or products by continuously introducing a certain concentration of two mixed gases into a box with a specified volume to keep the concentration, temperature, and relative humidity constant
The material used to manufacture this equipment is a corrosion-resistant imported plastic plate for the shell. The imported plate of the liner is high-temperature resistant, does not react with sulfur dioxide and other gases, does not absorb several mixed gases, and does not affect the test results. When this equipment is designed to work, the internal and external pressure-balanced mixed gas flows at a constant speed inside the box. Moreover, the design takes into account that condensation water will be generated on the top inner wall and other parts of the equipment, so the top of the box is designed to have a top angle. During the test, the condensation water will not drip onto the sample and affect the test results.
The corrosion test chamber has a beautiful appearance, reasonable structure and smooth, natural lines. The outer shell of the box is made of imported plastic sheets, with a smooth and bright appearance, no scratches, corrosion resistance, easy cleaning and no leakage. The inner tank is made of imported plastic sheet that is temperature resistant. Various auxiliary accessories and facilities are also designed with corrosion-resistant structures.
The oversized door is made of tempered glass and has a corrosion-resistant silicone rubber seal that is also corrosion-resistant and easy to clean without leakage. During the test, the indoor test conditions can be clearly observed from the outside without affecting the test results. The door and body of the chamber are strongly sealed with corrosion-resistant silicone rubber to prevent gas from escaping, which could affect test results, corrode other equipment in the room, and even cause harm to test operators.
The box is heated using a titanium heater that heats up quickly and distributes temperature and humidity evenly. The sample rack is designed according to national standards and can also be hooked. Various gases are first configured to the required concentration according to the requirements and come out of the cylinder respectively. After being decompressed and controlled by the corrosion-resistant solenoid valve, they enter the mixing box through the flow meter and then enter the shunt at the bottom of the box together with the temperature and humidity air in the air-conditioning cabinet. The concentration of the pipeline passing through the box evenly can be detected and controlled by concentration detectors of various gases.
The refrigeration system of the equipment is installed in the air conditioning cabinet on the left side of the equipment and mainly plays the role of cooling and dehumidification.
The equipment control system is designed on the right side of the box for easy operation. The specially designed corrosive gas filtering device can quickly and effectively filter the remaining gas in the box after the test. The remaining gas will not cause pollution to the atmosphere and is easy to operate.
Main technical specifications and parameters of the equipment
Specifications Studio size** Overall dimensions** Power
Q
Q
Q
. Temperature range ℃～+ ℃
. Relative humidity: ( )?
. Temperature uniformity: ℃
. Temperature fluctuation: .℃
. Test time is adjustable
. Concentration:. (adjustable)
. Concentration: (adjustable)
. Concentration: (adjustable)
. Concentration: (adjustable)
. Gas generation method: cylinder Method
. Gas concentration measurement method: detected by concentration detector
. Test gas flow: adjustable according to test requirements
. Sample holder: meets standard regulations
. Operating ambient temperature ℃ ~ ℃
. Operating environment humidity:
. Power supply requirements