The shower-type rain test device is comfortable to use and can be purchased with confidence

Natural rainwater damages products and materials, causing incalculable economic losses every year. The damage caused mainly includes corrosion, fading, deformation, strength reduction, swelling, mold, etc. In particular, electrical products can easily cause fires due to short circuits caused by rain. Therefore, conducting shell protection water testing for specific products or materials is an essential and critical procedure. This shower-type rain test device is an auxiliary device for the large-scale open swing tube rain test equipment. It needs to be installed in a special laboratory to conduct artificial simulated rain tests on products. The equipment can be used to assess and determine whether electrical and electronic product casings and seals can ensure good working performance of the equipment and components after or during the water test. The equipment can completely simulate the external rain environment and fully reproduce the impact of the external rain environment on the product.
This equipment artificially simulates the rain test, which does not include rainfall with strong wind speed, and does not take into account the large amount of water inflow caused by the temperature difference between the temperature of the test sample and the temperature of the rainwater.
This equipment can provide corresponding environmental simulation and accelerated testing for scientific research, product development and quality control.
Reference standards
This product meets the "Basic Environmental Testing Procedures for Electrical and Electronic Products Test Water Test Methods" and strictly complies with the corresponding national standards and other related standards for low-voltage electrical enclosure protection levels/, , , , etc. Design and manufacture of technical parameters. Water tests specified in corresponding standards can be carried out.
1. Introduction to structural design
This set of lotus type rain test device is made of high-quality materials and processed using the most advanced CNC processing equipment in China. The equipment consists of four parts: a column, a shower head, an adjustable baffle, and an adjustable water flow system. The columns, shower heads, and adjustable water baffles are made of stainless steel and will not rust during water tests. The column base is disc type. The shower sprinkler head is fixed on the column, and the sprinkler head is removed from the column when in use. All other accessories of the device are made of stainless steel.
The equipment needs to be equipped with a storage tank of considerable capacity to supply the swing pipe water spray required for the test. The water suction motor presses the water in the pool into the pipe, and by adjusting the pressure relief valve, the specified flow and pressure are maintained from the sprinkler head. The test water part is not recycled. Drainage should be considered during the test so that the test water can be discharged quickly without water accumulation.
2. Technical Specifications
Model
Water spray caliber? . ㎜
Spray water pressure ~
Number of spray holes
Sprinkler mouth? ㎜
/> The water spray angle is adjustable
The column is made of high-quality stainless steel pipe
The water spray holes are all laser-drilled
It has an adjustable water baffle
Water pressure control system
Adjust the pressure with a flow meter
Manually adjust the pressure relief valve
Equipped with a water filter