New equipment for modern pig raising, pig feed line automation equipment

Note: . It is not easy to add too much material to the hopper each time. The amount of material added should cover one-third of the hopper.
. Make sure there are no foreign objects in the feed, such as plastic bags, branches, wires and other foreign objects, to prevent the motor from getting stuck.
. Pay attention to safety during the loading process. Do not extend your hands into the suction port of the hopper to prevent your hands from being entangled in the machine.
. If any abnormality occurs, immediately cut off the power supply to the motor, and then power on after troubleshooting.
. The loading motor can only rotate clockwise, and the phase sequence of the motor's three-phase power supply cannot be adjusted at will.
.Power control box (replace it with the picture with a casing)
The power control box is mainly composed of a tension wheel, a fixed pulley, a corner nylon wheel, a tension spring, and a travel switch. The three-phase AC motor drives the tension wheel to rotate, and the tension wheel drives the stainless steel chain to run in the feeding pipeline. The woolen scraper belt of the stainless steel chain will hang the feed in the silo, thereby actually transporting the feed in the silo to the trough. .
Tension springs, fixed pulleys and corner nylon wheels can automatically adjust the tightness of the chain in the pipeline. When the power control box has abnormal conditions such as the tension spring falling off or the motor being stuck, the motor will automatically stop and the control box will issue an audible and visual alarm. The pig farm manager should first cut off the power supply and then open the power control box. After troubleshooting, the Can be powered.
Contact number